Release Notes

19. Issue: ASM-4688 : In NIC firmware, the X520/I350 rNDC firmware version 15.0.28 to
version 16.5.20 firmware fails to update in the firmware update logs.
Description : This is due to a specific firmware update issue with the
X520/I350 rNDC firmware version 16.5.20. The X520/I350 rNDC firmware
may require a step-up to an intermediate version of the firmware in order to
upgrade from 15.0.28 to 16.5.20.
Resolution/Workaround : Updating Intel X520/l350 cards with versions earlier
than 15.5.28 to 16.5.x requires a manual update to 15.5.28, prior to upgrading
to 16.5.x with ASM.
20. Issue: ASM-4697: Logs messages need to be updated for firmware retry logic.
Description : Firmware updates retries up to three attempts displaying an
error message for each failed attempt. The message displayed must be
updated to indicate a failed attempt occurred and a retry will follow. In some
cases a success message is logged followed by an error message.
Resolution/Workaround : None
21. Issue: ASM-4775 : Broadcom NIC will fail firmware update if current firmware is older
than 7.8.53.
Description : Broadcom firmware in the ASM catalog, 7.10.18, will require a
minimum of 7.8.53 for the firmware update to succeed.
Resolution/Workaround : None
22. Issue: ASM-4908 : Domain name lookup from the ASM interface continues to fail even
after configuring DNS on the appliance.
Description : If the DNS is not configured during initial setup, the domain
name lookup fails and this negative lookup is cached in the system.
Subsequent domain name lookup attempts continue to fail even after
configuring DNS on the appliance.
Resolution/Workaround : It is recommended to configure DNS during initial
setup. If DNS is configured after the domain lookup fails, restart the appliance
to resolve the issue.
23. Issue: ASM-4915 : ESXi install to SD card fails.
Description : While installing ESXi, a problem with the SD card mirroring may
result in a failure occasionally and will display the following error:
BANK5: invalid configuration.
BANK6: invalid configuration.
No hypervisor found.
Resolution/Workaround : Delete the server from the ASM service and
redeploy it again.
24. Issue: ASM-5132 : On PowerEdge C6320 systems with ESXi version 5.1 or ESXi version
5.2 (update 2), the keyboard is unresponsive if USB 3.0 is set to enabled in the server
BIOS.
Description : This issue occurs because USB 3.0 is not supported by ESXi
version 5.1 and ESXi version 5.2 (update 2).
Resolution/Workaround : Try any of the following options to resolve the
issue:
i.
Disable USB 3.0 from the server BIOS.
ii.
For servers that require USB 3.0, upgrade ESXi to version 5.5 (update 3) or
version 6.0.
25. Issue: ASM-5397 : Unable to login to the user interface.