Owner's Manual
To deploy a service:
1. In the Deploy Service dialog box, enter the following information in the Basic Details tab:
a. Enter the Service Name (required) and Service Description (optional) that identifies the service.
b. Select the template to deploy a service from the Select Template drop-down list.
The fields that are specifically required for deployment are displayed and must be completed for
deployment.
2. Click the Advanced Details tab.
The
Advance Details tab displays the settings defined for the components in the template. You can
modify the settings based on the requirement.
3. Click Deploy Now.
Related Links
Delete Service
Decommissioning Services Provisioned by Active System Manager
Decommissioning Services Provisioned by Active System Manager
When a service provisioned by Active System Manager (ASM) is no longer required, it is important to
decommission the resources. Therefore, the resources can be provisioned for future services.
The steps to accomplish this task differ based on the type of resource component provisioned. For hosts
provisioned by ASM, the default behavior when a service is deleted is to turn off the host. For server,
additional cleanup is required after turning off the server. For storage provisioned by ASM, the default
behavior when a service is deleted is to retain the storage volume available to make sure no critical data is
deleted.
As a best practice, you need to perform the following tasks while decommissioning a service. Make sure
to perform these tasks to avoid issues in provisioning of future services due to conflicts.
Related Links
Decommissioning Hyper-V Based Storage, Host, and Clusters
Decommissioning VMware Based Storage, Host, and Clusters
Decommissioning Hyper-V Based Storage, Host, and Clusters
To decommission Hyper-V based storage, host, and clusters:
1. SCVMM clusters should be uninstalled through SCVMM.
2. SCVMM host groups should be deleted if no longer used.
3. Hyper-V hosts should be removed from SCVMM.
4. Hyper-V hosts should be removed from the domain.
5. Storage volumes should be set offline and deleted when the data is no longer used.
6. If required, remove ASM provisioned VLANs from the host facing ports of the switch.
7. Remove host entries from DNS server.
26