Manual


1. Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.

2. Turn off your computer (see Turning Off Your Computer).

3. Disconnect your computer and all attached devices from their electrical outlets.


4. Place your computer against an object for support before you start removing or replacing components.

Back to Contents Page

CAUTION: To help prevent damage to the system board, remove the computer battery (see Removing the Computer Battery) before working
inside the computer.
CAUTION: To prevent damage to the display hinges, ensure that you do not adjust the angle between the display and the computer base after
removing the palm rest assembly.