Owner's Manual

Configuring the Stop Activity

To configure the Stop activity:

NOTE: If you do not include the optional Timeout property the activity does not wait for the specified persona or

VMRack to stop. Since persona booting takes some time, you can choose to poll the state if you are not using the

timeout property.

1. From the Activities pane, drag a Stop activity to the active runbook.

2. Double-click the Stop activity.

The Properties dialog box is displayed.

3. Configure the Properties tab, for more information, see Configure the Properties tab.

4. For information about the settings on the General and Run Behavior tabs, see Common Configuration Instructions

for All Activities .

5. Click Finish.