Service Manual

Removing the power-

adapter port

WARNING: Before working inside your computer, read the

safety information that shipped with your computer and

follow the steps in

Before working inside your computer.

After working inside your computer, follow the instructions

in After working inside your computer. For more safety best

practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the base panel.

2 Follow the procedure from step 1 to step 5 in “Removing the solid-state

drive”.

3 Follow the procedure from step 1 to step 8 in “Removing the palm rest”.

4 Remove the display assembly.

Procedure

1 Remove the screw that secures the power-adapter port bracket to the

power-adapter port.

2 Lift the power-adapter port bracket off the power-adapter port.

3 Release the power-adapter port from the computer base.