Manual

Replacing the Base Cover | 13
Replacing the Base Cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps
in "Before You Begin" on page 9. After working inside your computer,
follow the instructions in "After Working Inside Your Computer" on
page 11. For additional safety best practices information, see
the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the tabs on the base cover with the slots on the computer base and slide the
base cover into place.
2 Replace the screws that secure the base cover to the computer base.
3 Turn the computer over and open the display.
Postrequisites
Follow the instructions in "After Working Inside Your Computer" on page 11.
book.book Page 13 Monday, June 24, 2013 10:53 AM