Manual

Replacing the Battery | 15
Replacing the Battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. After working inside your computer,
follow the instructions in "After Working Inside Your Computer" on
page 11. For additional safety best practices information, see
the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Close the display and turn the computer over.
2 Align the tabs on the battery with the slots on the computer base.
3 Align the screw holes on the battery with the screw holes on the computer base.
4 Replace the screws that secure the battery to the computer base.
5 Connect the battery cable to the system-board connector.
Postrequisites
1 Replace the base cover. See "Replacing the Base Cover" on page 13.
2 Follow the instructions in "After Working Inside Your Computer" on page 11.
book.book Page 15 Monday, June 24, 2013 10:53 AM