Manual

30 | Removing the mSATA card
Removing the mSATA card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. After working inside your computer,
follow the instructions in "After Working Inside Your Computer" on
page 11. For additional safety best practices information, see
the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 12.
2 Remove the battery. See "Removing the Battery" on page 14.
Procedure
1 Remove the screw that secures the mSATA card to the system board.
2 Slide and remove the mSATA card from the system-board connector.
1screw 2mSATA card
1
2
book.book Page 30 Monday, June 24, 2013 10:53 AM