Manual

40 | Removing the Status-Light Board
Removing the Status-Light Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. After working inside your computer,
follow the instructions in "After Working Inside Your Computer" on
page 11. For additional safety best practices information, see
the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 12.
2 Remove the battery. See "Removing the Battery" on page 14.
3 Follow the instructions from step 1 to step 3 in "Removing the Secondary Hard-Drive
(optional)" on page 18.
4 Follow the instructions from step 1 to step 6 in "Removing the Palm Rest" on page 32.
book.book Page 40 Monday, June 24, 2013 10:53 AM