Service Manual
: .
.
www.dell.com/regulatory_compliance.
Procedure
1.Align the screw holes on the computer base with the screw holes on the palm-rest assembly.
2.Replace the 14 screws (M2.5x8) that secure the computer base to the palm-rest assembly.
3.Replace the two screws (M2.5x5) that secure the computer base to the palm-rest assembly.
4.Connect the tron-light cables to the system board.
5.Route the antenna cables through the routing guides on the computer base.
1. / .
2.
.
3.
.
4.
.
28