Service Manual

Removing the tobii eye-tracker module

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Prerequisites

1. Remove the

base cover.

2. Remove the wireless card.

3. Remove the solid-state drive.

4. Remove the memory modules.

5. Remove the

rear-I/O cover.

6. Remove the computer base.

7. Remove the display assembly.

Procedure

Using a plastic scribe, pry the tobii eye-tracker module out of the display bezel.