Service Manual

Main

M.2 PCIe SSD-3 Displays the type of third SSD installed.

Table 4. System setup options—Advanced menu

Advanced

Intel(R) SpeedStep Technology Allows you to enable or disable Intel (R) Speedstep

Technology.

NOTE: If enabled, the processor clock speed and core

voltage are adjusted dynamically based on the processor

load.

Default: Enabled

Virtualization Allows you to enable or disable the Intel Virtualization

technology.

Default: Enabled

VT for Direct I/O Specify whether a Virtual Machine Monitor (VMM) can utilize

the additional hardware capabilities provided by Intel

Virtualization Technology for Direct I/O.

Integrated NIC Allows you to enable or disable the on-board LAN controller.

Default: Enabled

USB Emulation Allows you to enable or disable the USB emulation feature. This

feature defines how the BIOS, in the absence of a USB-aware

operating system, handles USB devices. USB emulation is

always enabled during POST.

NOTE: You cannot boot any type of USB device (floppy,

hard drive, or memory key) when this option is off.

Default: Enabled

USB PowerShare Allows you to charge USB devices when the computer is turned

off or in standby mode.

Default: Enabled

USB Wake Support Allows you to enable USB devices to wake the computer from

standby or to disable the USB wake support feature.

NOTE: If USB PowerShare is enabled, a device

connected to the USB PowerShare connector may not

wake the computer.

Default: Disabled

SATA Operation Allows you to configure the operating mode of the integrated

SATA hard drive controller.

Default: AHCI

Adapter Warnings Allows you to choose if the computer should display warning

messages when you use AC adapters that are not supported by

your computer.

Default: Enabled

Function Key Behavior Allows you to set function key or multimedia key as the default

function key behavior.

Default: Function key

Express Charge Allows you to charge your computer battery using Standard

Charge or Express Charge mode.

Default: Express Charge