Users Guide

30 | Setting up the monitor
5. Open the protective cover on the monitor to access the VESA slot on the
monitor.
CAUTION: When connecting the stand assembly to the display, do not
plac
e the stand riser directly on the display back panel. Doing so may
damage the pogo pins on the stand due to misalignment.
6. C
arefully insert the tabs on the stand riser into the slots on the display back
cover and lower the stand assembly to snap it into place.
7. Route the power cable through the cable-management slot on the stand
and then through the cable-management clip at the back of the display.