Alienware AW2521HFA/ AW2521HFLA Monitor Benutzerhandbuch Modell: AW2521HFA/AW2521HFLA Behördliche Modellnummer: AW2521HFb
Hinweise, Vorsichtsmaßregeln und Warnungen HINWEIS: EIN HINWEIS beschreibt wichtige Informationen, damit Sie Ihren Computer besser nutzen können. VORSICHT: EINE VORSICHTSMASSREGEL führt zu potentiellen Schäden an der Hardware oder dem Verlust von Daten, wenn die Anweisungen nicht befolgt werden. ACHTUNG: EINE ACHTUNG beschreibt die Möglichkeit von Eigentumsschäden, Verletzungen oder Tod. © 2020 Dell Inc. oder deren Tochtergesellschaften. Alle Rechte vorbehalten.
Inhalt Über Ihren Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Lieferumfang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Produktmerkmale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Komponenten und Bedienelemente . . . . . . . . . . . . . . . . . . . . . 9 Vorderseite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Ansicht von hinten . . . . . . . . . . . . . . . . . .
VESA Wandmontageset (optional). . . . . . . . . . . . . . . . . . . . .32 Monitor bedienen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Monitor einschalten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Verwendung der Joystick Steuerung. . . . . . . . . . . . . . . . . . .33 Hintere Bedienfeldtasten verwenden. . . . . . . . . . . . . . . . . . .34 Anwendung der Anzeige auf dem Bildschirm (OSD-Menü) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Universal Serial Bus (USB) spezifische Probleme . . . . . . . .70 Anhang. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 FCC-Erklärung (nur für die USA) und weitere rechtliche Informationen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Kontakt zu Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 EU Produktdatenbank für Energielabel und Produktinformationsblatt . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Über Ihren Monitor Lieferumfang Der Monitor wird mit den unten gezeigten Artikeln geliefert. Falls ein Artikel fehlt, wenden Sie sich an den technischen Support von Dell. Weitere Informationen finden Sie unter Kontakt zu Dell. HINWEIS: Einige Komponenten könnten optional sein und nicht mit dem Monitor geliefert werden. Einige Funktionen oder Medien könnten in einigen Ländern nicht verfügbar sein.
E/A Abdeckung Netzkabel (Je nach Land verschieden) DisplayPort Kabel (DisplayPort auf DisplayPort) HDMI-Kabel USB 3.
Produktmerkmale Der Alienware 25 Gaming Monitor ist in zwei Farbvarianten erhältlich: Dunkle Seite des Mondes (AW2521HFA) und Mondlicht (AW2521HFLA). Beide Monitor bieten Active Matrix-, Dünnschichttransistor- (TFT) und FlüssigkristallTechnologien (LCD) und eine LED-Beleuchtung. Die Monitorfunktionen umfassen: • 62,2 cm (24,5 Zoll) sichtbarer Bereich (diagonal gemessen).
ACHTUNG: Die möglichen Langzeiteffekte von blauem Licht des Monitors könnten die Augen schädigen, z.B. Übermüdung der Augen, digitale Überanstrengung der Augen usw. Die ComfortView Funktion verringert den Anteil des blauen Lichts des Monitors, um den Augenkomfort zu optimieren. * Der 1 ms Grau-zu-Grau Modus ist im Extrem Modus erreichbar, um sichtbare Bewegungsunschärfe und erhöhte Bildempfindlichkeit zu reduzieren. Dies kann jedoch einige leichte und auffällige visuelle Artefakte in das Bild einbringen.
Ansicht von hinten Ansicht von hinten ohne Monitor-Standfuß Rückansicht mit Monitorständer Bezeichnung 1 2 Beschreibung Verwenden Joystick Zur Steuerung des OSD-Menüs. Funktionstasten Weitere Informationen finden Sie unter Monitor bedienen. 3 Strichcode, Seriennummer und Nehmen Sie auf dieses Etikett Service Tag Etikett Bezug, wenn Sie Dell bezüglich technischer Unterstützung kontaktieren. 4 Kabelführungsklemmen Zum sauberen Verlegen der Kabel.
6 VESA-Montagebohrungen (100 mm x 100 mm - Hinter der angebrachten VESA Abdeckung) Monitor-Wandbefestigung per VESA-kompatibler Wandmontagehalterung (100 mm x 100 mm). 7 Etikett mit behördlichen Bestimmungen Liste der behördlichen Zulassungen. Leuchtdock Anschluss Wenn der Ständer an den Monitor angeschlossen ist, Anschluss versorgt der Dock-Anschluss das Licht im Ständer mit Strom. 9 Kabelführungsöffnung (an der Rückseite des Ständers) Bringt Ordnung durch Führung der Kabel durch diese Öffnung.
USB 3.0 Ports (2) HINWEIS: Um diese Anschlüsse zu verwenden, müssen Sie das USB-Kabel (im Lieferumfang des Monitors enthalten) mit dem USB-Upstream-Anschluss des Monitors und Ihrem Computer verbinden. 3 4 USB 3.0-Port mit Aufladefunktion Zum Aufladen Ihres USB-Gerätes. Kopfhöreranschluss Zum Anschluss eines Kopfhörers oder Lautsprechers.
Technische Daten des Monitors Modell AW2521HFA/AW2521HFLA Bildschirmtyp Aktiv-Matrix-TFT-LCD Panel-Technologie Fast IPS Seitenverhältnis 16:9 Sichtbares Bild Diagonale 622,28 mm (24,5 Zoll) Breite (aktiver Bereich) 543,744 mm (21,41 Zoll) Höhe (aktiver Bereich) 302,616 mm (11,91 Zoll) Gesamtbereich 164545,63 mm2 (255,04 Zoll2) Pixelabstand 0,2832 mm x 0,2802 mm Pixel pro Zoll (PPI) 90 Betrachtungswinkel Vertikal 178° (typisch) Horizontal 178° (typisch) Luminanz 400 cd/m² (typisch) Ko
Integrierte Geräte • USB 3.0 Super-Speed Hub (mit 1 USB 3.0 Upstream-Port) • 4 x USB 3.0 Downstream-Port (einschließlich 1 Port, der schnelles Laden unterstützt) Konnektivität • 1 x DisplayPort Version 1.2 (hinten) • 2 x HDMI Port Version 2.0 (hinten) • 1 x USB 3.0 Upstream-Port (hinten) • 3 x USB 3.0 Downstream-Ports (unten: 1; hinten: 2) • 1 x USB 3.0 Upstream-Port mit BC1.
Unterstützte Videomodi Modell AW2521HFA/AW2521HFLA Videoanzeigefähigkeiten (HDMI & DisplayPortWiedergabe) 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, FHD Voreingestellte Anzeigemodi Anzeigemodus Horizontalfrequenz (kHz) Vertikale Frequenz (Hz) Pixeltakt (MHz) SyncPolarität (horizontal/ vertikal) VESA, 640 x 480 31,5 59,9 25,2 -/- VESA, 640 x 480 37,5 75,0 31,5 -/- IBM, 720 x 400 31,5 70,1 28,3 -/+ VESA, 800 x 600 37,9 60,3 40,0 +/+ VESA, 800 x 600 46,9 75,0 49,5 +/+ VESA,
Elektrische Daten Modell AW2521HFA/AW2521HFLA Videoeingangssignale HDMI 2.0*/DisplayPort 1.2, 600 mV für jede differentielle Linie, 100 Ohm Eingangsimpedanz pro Differentialpaar. Netzeingangsspannung / Frequenz / Strom 100 VAC bis 240 VAC / 50 Hz oder 60 Hz + 3 Hz / 1,5 A (typisch) Einschaltstrom • 120 V: 30 A (max.) bei 0°C (Kaltstart) • 240 V: 60 A (max.) bei 0°C (Kaltstart) Stromverbrauch • 0,2 W (Aus Modus)1 • 0,3 W (Standbymodus)1 • 20,4 W (Ein Modus)1 • 72 W (Max.
Physische Eigenschaften Modell AW2521HFA/AW2521HFLA • Digital: HDMI, 19-polig Signalkabeltyp • Digital: DisplayPort, 20-polig • Universal Serial Bus: USB, 9-polig HINWEIS: Dell Monitore sind so konzipiert, dass sie optimal mit den Videokabeln zusammenarbeiten, die mit Ihrem Monitor mitgeliefert werden.
Gewicht des Ständers 3,21 kg (7,08 lb) Glänzender Vorderrahmen 17 + 3 (nur Vorderkinn) Umgebungsbedingungen Modell AW2521HFA/AW2521HFLA Kompatible Standards Bildschirm aus arsenfreiem Glas und frei von Quecksilber Temperatur Im Betrieb 0°C bis 40°C (32°F bis 104°F) Ausgeschaltet • Lagerung: -20°C bis 60°C (-4°F bis 140°F) • Versand: -20°C bis 60°C (-4°F bis 140°F) Luftfeuchtigkeit Im Betrieb 10% bis 80% (nicht kondensierend) Ausgeschaltet • Lagerung: 5% bis 90% (nicht kondensierend) • Versand:
Pinbelegung DisplayPort-Anschluss Pin Nummer Seite mit 20 Stiften des angeschlossenen Signalkabels 1 ML3 (n) 2 GND 3 ML3 (p) 4 ML2 (n) 5 GND 6 ML2 (p) 7 ML1 (n) 8 GND 9 ML1 (p) 10 ML0 (n) 11 GND 12 ML0 (p) 13 GND 14 GND 15 AUX (p) 16 GND 17 AUX (n) 18 Hot-Plug-Erkennung 19 Re-PWR 20 +3,3 V DP_PWR Über Ihren Monitor | 19
HDMI-Anschluss Pin Nummer 20 | Seite mit 19 Stiften des angeschlossenen Signalkabels 1 TMDS DATA 2+ 2 TMDS DATA 2, Abschirmung 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1, Abschirmung 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0, Abschirmung 9 TMDS DATA 0- 10 TMDS CLOCK+ 11 TMDS CLOCK, Abschirmung 12 TMDS CLOCK- 13 CEC 14 Reserviert (am Gerät nicht angeschlossen) 15 DDC CLOCK (SCL) 16 DDC DATA (SDA) 17 DDC/CEC-Masse 18 +5 V-Stromversorgung 19 HOT-PLUG-ERKENNUNG Über
Plug & Play Unterstützung Sie können den Monitor in jedem Plug-and-Play-kompatiblen System installieren. Der Monitor stellt dem Computersystem automatisch eigene EDIDDaten (Extended Display Identification Data) über DDC-Protokolle (Display Data Channel) zur Verfügung, so dass sich das System selbst konfigurieren und die Monitoreinstellungen optimieren kann. Die meisten Monitor-Installationen laufen automatisch ab; auf Wunsch können Sie unterschiedliche Einstellungen wählen.
5 SSTX- 6 SSTX+ 7 GND 8 SSRX- 9 SSRX+ USB-Downstream-Anschluss Pin Nummer 9-poliger Verbinder 1 VCC 2 D- 3 D+ 4 GND 5 SSRX- 6 SSRX+ 7 GND 8 SSTX- 9 SSTX+ USB-Ports • 1 x Upstream - hinten • 2 x Downstream - hinten • 2 x Downstream - unten Ladeanschluss - der Anschluss mit dem Symbol; unterstützt bis zu 2 A Schnellladung, wenn das Gerät BC1.2-kompatibel ist. HINWEIS: Zur vollen Ausschöpfung der USB 3.0-Funktionalität benötigen Sie einen USB 3.0-fähigen Computer.
HINWEIS: Die USB-Anschlüsse am Monitor funktionieren nur, wenn der Monitor eingeschaltet oder im Standbymodus ist. Wenn Sie den Monitor aus- und wieder einschalten, kann es ein paar Minuten dauern, bis angeschlossene Peripheriegeräte wieder normal funktionieren. LCD-Monitorqualität und Hinweise zu Pixeln Bei der Herstellung von LCD-Monitoren ist es keine Seltenheit, dass einzelne Bildpunkte (Pixel) nicht oder dauerhaft leuchten.
Monitor einrichten Ständer anbringen HINWEIS: Der Ständer wird im Werk nicht montiert. HINWEIS: Die folgenden Anweisungen beziehen sich nur auf die Anbringung des Ständers, der mit Ihrem Monitor geliefert wurde. Wenn Sie einen Ständer anbringen, den Sie von einer anderen Quelle gekauft haben, folgen Sie den Anweisungen, die mit dem Ständer geliefert wurden. VORSICHT: Die folgenden Schritte sind wichtig, um Ihren gebogenen Bildschirm zu schützen.
4. Schließen Sie den Schraubring. 5. Öffnen Sie die Schutzabdeckung am Monitor, um auf den VESASteckplatz am Monitor zuzugreifen.
VORSICHT: Beim Anschließen des Ständers an den Monitor darf der Ständerarm nicht direkt auf der Rückseite des Monitors angebracht werden. Dabei könnten die Pogo-Stifte auf dem Ständer aufgrund von falscher Ausrichtung beschädigt werden. 6. Fügen Sie die Laschen am Ständer vorsichtig in die Schlitze an der hinteren Abdeckung des Monitors ein und senken Sie den Ständer ab, um ihn einrasten zu lassen. 7.
10. Schließen Sie die erforderlichen Kabel an den Monitor an. HINWEIS: Dell Monitore sind so konzipiert, dass sie optimal mit den von Dell gelieferten Kabeln zusammenarbeiten. Dell übernimmt keine Garantie für die Videoqualität und die Leistung bei Verwendung von Kabeln anderer Hersteller. HINWEIS: Verlegen Sie jedes Kabel ordentlich, so dass die Kabel vor der Installation der E/A Abdeckung sauber angeordnet sind.
12. Heben Sie die Schutzabdeckung vom Monitor. 13. Schieben Sie die Laschen auf der E/A-Abdeckung in die Steckplätze an der hinteren Abdeckung des Monitors, bis sie einrasten. HINWEIS: Vergewissern Sie sich, dass alle Kabel durch die E/A Abdeckung und den Kabelführungsöffnung am Ständer geführt werden.
Anschluss des Computers ACHTUNG: Bevor Sie die in diesem Abschnitt beschriebenen Schritte ausführen, lesen und befolgen Sie bitte die Sicherheitshinweise. HINWEIS: Schließen Sie nicht alle Kabel gleichzeitig an den Computer an. HINWEIS: Die Abbildungen dienen lediglich der Veranschaulichung. Das tatsächliche Aussehen kann etwas abweichen. So schließen Sie Ihren Monitor an einen Computer an: 1. Verbinden Sie das andere Ende des DisplayPort Kabels oder HDMI-Kabels mit Ihrem Computer. 2.
Entfernen des Monitorständers HINWEIS: Damit der Bildschirm beim Abnehmen des Ständers nicht verkratzt wird, achten Sie darauf, dass der Monitor auf einen sauberen Untergrund gelegt wird. HINWEIS: Die folgenden Anweisungen beziehen sich nur auf die Anbringung des Ständers, der mit Ihrem Monitor geliefert wurde. Wenn Sie einen Ständer anbringen, den Sie von einer anderen Quelle gekauft haben, folgen Sie den Anweisungen, die mit dem Ständer geliefert wurden. So nehmen Sie den Ständer ab: 1.
6. Halten Sie die Ständerfreigabetaste gedrückt. 7. Heben Sie den Ständer vom Monitor ab.
VESA Wandmontageset (optional) (Schraubenabmessung: M4 x 10 mm) Lesen Sie die mit der VESA-kompatiblen Montageausrüstung für die Wand gelieferte Anleitung. 1. Verbinden Sie das andere Ende des DisplayPort Kabels oder HDMI Kabels mit Ihrem Computer. 2. Entfernen Sie den Monitorständer. (Siehe Entfernen des Monitorständers.) 3. Die vier Schrauben, mit denen die Plastikabdeckung befestigt wird, mit einem Kreuzschlitzschraubenzieher entfernen. 4.
Monitor bedienen Monitor einschalten Drücken Sie auf die Ein/Aus-Taste, um den Monitor einzuschalten. Verwendung der Joystick Steuerung Verwenden Sie die Joystick Steuerung an der Rückseite des Monitors, um OSDEinstellungen vorzunehmen. 1. Drücken Sie die Joystick Taste, um das OSD-Hauptmenü zu starten. 2. Bewegen Sie den Joystick nach oben/unten/links/rechts, um zwischen den Optionen zu wechseln. 3. Drücken Sie die Joystick Taste erneut, um die Einstellungen zu bestätigen und zu beenden.
• Für die 2-Wege-Navigation (rechts und links). • Nach rechts bewegen, um in das Untermenü zu gelangen. • Nach links bewegen, um das Untermenü zu verlassen. • Erhöht (rechts) oder verringert (links) die Parameter des ausgewählten Menüpunktes. • Für die 2-Wege-Navigation (oben und unten). • Schaltet zwischen den Menüpunkten um. • Erhöht (oben) oder verringert (unten) die Parameter des ausgewählten Menüpunktes.
4 Zum direkten Zugriff auf den Dunkel Stabilisierung Anpassungsregler. Schnellzugriffstasten/ Dunkel Stabilisierung 5 Zum direkten Zugriff auf die Helligkeit/Kontrast Anpassungsregler. Schnellzugruffstaste/ Helligkeit/Kontrast Wenn Sie eine dieser Tasten (außer der Joystick Taste) drücken, erscheint die OSD-Statusleiste, um Sie über die aktuellen Einstellungen einiger OSDFunktionen zu informieren.
Voreingestellte Ermöglicht Ihnen die Auswahl aus einer Liste voreingestellter Modi Farbmodi. • Standard: Lädt die Standard-Farbeinstellungen des Monitors. Dies ist der voreingestellte Standardmodus. • FPS: Lädt Farbeinstellungen, die ideal für Egoshooter (FPS) sind. • MOBA/RTS: Lädt Farbeinstellungen, die ideal für Multiplayer Online Battle Arena (MOBA) und Echtzeitstrategie (RTS) Spiele sind. • RPG: Lädt Farbeinstellungen, die ideal für die meisten Rollenspiele (RPG) sind.
Voreingestellte Modi Um das Risiko einer Überanstrengung der Augen und Hals/Arm/Rücken/Schulter Schmerzen wegen der Verwendung des Monitors über einen längeren Zeitraum zu reduzieren, empfehlen wir Ihnen: 1. Stellen Sie den Abstand des Monitors in einem Bereich von 20 Zoll - 28 Zoll (50 - 70 cm) zu Ihren Augen ein. 2. Zwinkern Sie häufig, um Ihre Augen zu befeuchten oder befeuchten Sie Ihre Augen mit Wasser, wenn Sie den Monitor über einen längeren Zeitraum genutzt haben. 3.
Spiel verbessern Modus Die Option bietet drei verfügbare Funktion, um Ihr Gameplay Erlebnis zu verbessern. • Aus Zum Deaktivieren der Funktionen im Spiel verbessern Modus. • Timer Ermöglicht Ihnen die Deaktivierung oder Aktivierung des Timers oben links auf dem Monitor. Der Timer zeigt die absolvierte Zeit seit dem Beginn des Spiels. Wählen Sie eine Option aus der Liste der Zeitintervalle, um sich über die verbleibende Zeit im Klaren zu sein.
Dunkel Diese Option verbessert die Sichtbarkeit in dunklen Stabilisierung Spielszenarien. Je höher der Wert (zwischen 0 bis 3), desto besser die Sichtbarkeit im dunklen Bereich des angezeigten Bildes. Farbton Diese Funktion kann die Farbe des Videobildes in Richtung Grün bzw. Violett ändern. Mit dieser Funktion können Sie den Hautfarbton einstellen. Verwenden Sie den Joystick zur Einstellung des Farbtonpegels zwischen 0 und 100.
Eingabe-Quelle Im Eingabe-Quelle Menü wählen Sie zwischen verschiedenen Videosignalen aus, die eventuell an Ihrem Monitor angeschlossen sind. DP Den DP Eingang wählen Sie, wenn Sie einen DisplayPort (DP) Anschluss nutzen. Drücken Sie auf die Joystick Taste, um die Auswahl zu bestätigen. HDMI 1 Den HDMI 1order HDMI 2-Eingang wählen Sie, wenn Sie einen HDMI-Anschluss nutzen. Drücken Sie auf die Joystick Taste, um die Auswahl zu bestätigen. HDMI 2 Autom.
AlienFX Beleuchtung Farbe Verwenden Sie dieses Menü, um die LED-Lichteinstellungen für die Ein-/Aus Taste, das Alienware Logo und den Lichtstreifen auf dem Ständer anzupassen. Um eine LED-Lichtfarbe festzulegen, wählen Sie Auf und bewegen Sie den Joystick, um die Option Benutzerfarbe hervorzuheben. Nehmen Sie anschließend eine Auswahl aus der Liste der 20 verfügbaren Farben durch Verschieben des Joysticks nach oben oder unten vor.
Die folgende Tabelle zeigt die Farbnummer und RGB Codes für die 20 LED Farben ein. Nr. R G B 1 0 0 0 2 63 0 255 3 100 0 240 4 255 0 255 5 239 12 175 6 255 0 89 7 255 0 0 8 255 45 0 9 255 75 0 10 255 120 0 11 204 255 0 12 127 255 0 13 76 255 0 14 0 255 0 15 0 255 25 16 0 255 63 17 0 240 240 18 0 63 255 19 0 25 255 20 0 0 255 Wählen Sie Aus, um die AlienFX Lichter auszuschalten.
Spektrum Wenn Sie Auf auswählen, wird die LED leuchten und die Farben in der Reihenfolge des Farbspektrums ändern: rot, orange, gelb, grün. blau, indigo und violett. AlienFX Beleucht. zurücks. Setzen Sie im Menü AlienFX Beleuchtung sämtliche Einstellungen auf die Standardwerte zurück. Display Helligkeit Mit Display wird das Bild eingestellt. Mit der Helligkeit wird die Leuchtstärke der Hintergrundbeleuchtung eingestellt.
Längen-/ Stellen Sie das Seitenverhältnis auf Breit 16:9, Automatische Seitenverhält- Skalierung, 4:3 oder 1:1. nis Eingangsfarb- Hier können Sie einen der folgenden Videoeingabemodi format wählen: RGB: Wählen Sie diese Option, wenn der Monitor über das DP oder HDMI-Kabel mit einem Computer (oder Medien Player) verbunden ist. YPbPr: Wählen Sie diese Option, wenn Ihr Medien Player nur den YPbPr Ausgang unterstützt. Schärfe Mit dieser Funktion können Sie die Bilddarstellung schärfer oder weicher einstellen.
Menü Diese Option auswählen, um die Einstellungen der OSD, wie z. B. Sprache der OSD, die Zeitdauer der Anzeige des Menüs auf dem Bildschirm usw., vorzunehmen. Sprache Zum Einstellen der OSD-Anzeige auf eine der acht verfügbaren Sprachen (Englisch, Spanisch, Französisch, Deutsch, Brasilianisches Portugiesisch, Russisch, vereinfachtes Chinesisch oder Japanisch). Transparenz Wählen Sie diese Option, um die Menü-Transparenz durch Verschieben des Joysticks nach oben oder unten abzuändern (min. 0 / max.
USB Ermöglicht Ihnen die Aktivierung oder Deaktivierung der USB-Funktion während des Monitor Standbymodus. HINWEIS: USB EIN/AUS im Standbymodus ist nur verfügbar, wenn das USB Upstream-Kabel nicht angeschlossen ist. Diese Option wird ausgegraut, wenn das USB Upstream-Kabel angeschlossen wird. Personalisieren Setzen Sie im Menü Individualisieren sämtliche Einstellungen rücksetzen auf die Standardwerte zurück. Weiteres Info Anzeigen Zeigt die aktuellen Einstellungen des Monitors an.
LCDKonditionierung Firmware Zum Reduzieren von geringen Bildverzerrungen. Die Zeitdauer, die das Programm zum Durchführen benötigt, hängt vom Grad der Bildaufbewahrung ab. Diese Funktion kann durch Auswählen von Auf aktiviert werden. Zeigt die Firmwareversion des Monitors an. Servicemarkie- Zeigt die Servicemarkierung des Monitors an. Diese rung Zeichenfolge wird benötigt, wenn Sie nach telefonischem Support suchen, Ihren Garantiestatus überprüfen, Treiber auf der Webseite von Dell aktualisieren usw.
Das bedeutet, dass sich der Monitor nicht richtig auf das Signal einstellen kann, das er vom Computer empfängt. Unter Technische Daten des Monitors finden Sie die von Ihrem Monitor unterstützten Horizontal- und Vertikalfrequenzen. Die empfohlene Auflösung beträgt 1920 x 1080.
Die folgende Meldung erscheint, wenn der Monitor in den Standbymodus wechselt: Durch Aktivieren des Computers und "Aufwecken" des Monitors erhalten Sie wieder Zugriff auf das Anwendung der Anzeige auf dem Bildschirm (OSDMenü). HINWEIS: Die Meldung könnte je nach angeschlossenem Eingangssignal leicht unterschiedlich sein.
Wenn Zurücksetzen ausgewählt ist, wird die folgende Meldung angezeigt: Unter Problemlösung finden Sie weitere Informationen. Sperren der Kontrolltasten an der Rückseite des Geräts Sie können die Kontrolltasten an der Rückseite sperren, um den Zugriff auf das OSD-Menü und/oder die Ein-/Aus-Taste zu verhindern. Zum Sperren der Taste(n): 1. Halten Sie die Taste 5 vier Sekunden lang gedrückt, bis ein Menü auf dem Bildschirm erscheint. 2.
Maximale Auflösung einstellen So stellen Sie die maximale Monitorauflösung ein: Unter Windows 7, Windows 8 und Windows 8.1: 1. Wählen Sie unter Windows 8 und Windows 8.1 die Desktop Kachel zum Wechsel auf den klassischen Desktop. 2. Klicken Sie mit der rechten Maustaste auf den Desktop und klicken Sie auf Bildschirmauflösung. 3. Klicken Sie in der Dropdownliste auf die Bildschirmauflösung und wählen Sie 1920 x 1080 aus. 4. Klicken Sie auf OK. Unter Windows 10: 1.
Kipp- und Schwenkeinstellung Ist der Ständer am Monitor befestigt, können Sie diesen neigen und drehen, um den bestmöglichen Ansichtswinkel einzustellen. HINWEIS: Der Ständer wird im Werk nicht montiert. Höhenverstellung HINWEIS: Der Ständer kann um bis zu 130 mm nach oben ausgezogen werden. Die nachstehende Abbildung zeigt, wie Sie den Fuß ausziehen können.
Monitor drehen Bevor Sie den Monitor drehen, sollte der Monitor komplett vertikal ausgezogen (vertikale Verlängerung) und geneigt sein, damit der untere Rand des Monitors nicht an der Aufstellfläche anschlägt.
Entgegen dem Uhrzeigersinn drehen HINWEIS: Um die Anzeige-Rotierung-Funktion (Querformat/ Hochformat) mit Ihrem Dell-Computer nutzen zu können, benötigen Sie einen aktualisierten Grafikkartentreiber, der nicht mit dem Monitor geliefert wird. Zum Herunterladen des Grafikkartentreibers besuchen Sie www.dell.com/support und schauen im Download-Bereich unter Videotreiber nach den neuesten Treiberaktualisierungen. HINWEIS: Im Hochformat-Anzeigemodus kann die Leistung von Grafikintensiven Anwendungen (z.B.
Anzeigerotation-Einstellungen Ihres Systems anpassen Nachdem Sie Ihren Monitor gedreht haben, müssen Sie die AnzeigerotationEinstellungen Ihres Systems mit den folgenden Schritten anpassen. HINWEIS: Wenn Sie den Monitor nicht mit einem Dell-Computer verwenden, müssen Sie die Grafiktreiber-Webseite oder die Webseite Ihres Computerherstellers besuchen, um Informationen über das Ändern der Anzeigerotation-Einstellungen Betriebssystems zu erhalten. So stellen Sie die Anzeigerotation ein: 1.
Nutzung der AlienFX Anwendung Sie können die LED Lichteffekte über mehrere verschiedene Zonen auf Ihrem Alienware Monitor über AlienFX im AWCC (Alienware Command Center) konfigurieren. HINWEIS: Wenn Sie einen Alienware Gaming Desktop oder Laptop besitzen, können Sie direkt auf das AWCC zugreifen, um die Lichter zu steuern. HINWEIS: Weitere Informationen finden Sie in der Online-Hilfe des Alienware Command Center.
• Alienware Gaming Monitor Control Center Treiber 2. Navigieren Sie zu dem Ordner, in dem Sie die Setup Dateien gespeichert haben. 3. Doppelklick Sie die Setup Datei und folgen Sie den Anweisungen auf dem Bildschirm, um die Installation abzuschließen. Navigation durch das AlienFX Fenster Mit dem Alienware Command Center können Sie mit AlienFX die LED Lichtfarben und Übergangseffekte für Ihren Alienware Monitor steuern.
C Themenkomponenten Mit diesen Komponenten (LIGHTING (BELEUCHTUNG), MACROS (MAKROS), SETTINGS (EINSTELLUNGEN)) können Sie das ausgewählte Design als aktives Theme festlegen. D THEMES (THEMEN) Zeigt die Themen in der Listen- oder Gitteransicht an. Liste E Hintergrundsteuerun- Stellt die Effekte der Hintergrundanimation ein. gen F Hilfe Klicken Sie darauf, um die AWCC Online-Hilfe aufzurufen.
J Live-Vorschau Die Lichtzonen sind mit nummerierten Beschriftungen versehen. Sie können eine einzelne Zone auswählen, indem Sie auf die Nummer auf dem Bild klicken. Wenn Sie Beleuchtungseinstellungen vornehmen, zeigt die Vorschau des Monitors die neuen Effekte gleichzeitig an. Ein Thema erstellen So erstellen Sie ein Thema mit Ihren bevorzugten Lichteinstellungen: 1. Starten Sie AWCC. 2. Klicken Sie auf FX in der oberen Menüleiste, um auf den Startbildschirm von AlienFX zuzugreifen. 3.
Beleuchtungseffekte einstellen Das LIGHTING (BELEUCHTUNG) Feld bietet verschiedene Beleuchtungseffekte. Sie können auf Effect (Effekt) klicken, um ein DropdownMenü mit den verfügbaren Optionen zu öffnen. HINWEIS: Die angezeigten Optionen können je nach der/den von Ihnen angegebenen Beleuchtungszone(n) variieren.
Morph (Überblenden) Beschreibungen 3. Wiederholen Sie die vorherigen Schritte, um Color 2 (Farbe 2) als Endhelligkeit festzulegen. 4. Ziehen Sie den Schieberegler BRIGHTNESS (HELLIGKEIT), um die Helligkeit der Farbe einzustellen. 5. Ziehen Sie den TEMPO Schieberegler, um die Übergangsgeschwindigkeit anzupassen. Pulse (Pulsierend) Beschreibungen Der Effekt bewirkt, dass das Licht mit einer kurzen Pause blinkt. Um die Einstellungen vorzunehmen: 1.
Color (Farbe) Beschreibungen Der Effekt lässt das LED Licht in einer einzigen statischen Farbe leuchten. Um die Einstellungen vorzunehmen: 1. Wählen Sie eine bevorzugte Farbe aus der Farbpalette oder der Liste der PRESET COLORS (VOREINGESTELLTEN FARBEN). Die ausgewählte Farbe und ihre RGB-Farbcodes werden im rechten Feld angezeigt. HINWEIS: Um die Farbe zu ändern, verwenden Sie die Pfeiltasten nach oben und unten neben den Feldern R/G/B, um die Farbcodes zu bearbeiten. 2.
Breathing (Blinkend) Beschreibungen Der Effekt lässt das Licht von hell auf dunkel wechseln. Um die Einstellungen vorzunehmen: 1. Wählen Sie eine bevorzugte Farbe aus der Farbpalette oder der Liste der PRESET COLORS (VOREINGESTELLTEN FARBEN). Die ausgewählte Farbe und ihre RGB-Farbcodes werden im rechten Feld angezeigt. HINWEIS: Um die Farbe zu ändern, verwenden Sie die Pfeiltasten nach oben und unten neben den Feldern R/G/B, um die Farbcodes zu bearbeiten. 2.
Problemlösung ACHTUNG: Bevor Sie die in diesem Abschnitt beschriebenen Schritte ausführen, lesen und befolgen Sie bitte die Sicherheitshinweise. Selbsttest Ihr Monitor verfügt über eine Selbsttestfunktion, mit der Sie überprüfen können, ob der Monitor ordnungsgemäß funktioniert. Wenn Monitor und Computer ordnungsgemäß miteinander verbunden sind, der Monitorbildschirm jedoch leer bleibt, führen Sie bitte wie folgt den Monitor-Selbsttest aus: 1. Schalten Sie sowohl Computer als auch Monitor aus. 2.
Selbstdiagnose Ihr Monitor ist mit einem integrierten Selbstdiagnose-Werkzeug ausgestattet, das Ihnen bei der Diagnose von Problemen mit dem Monitor oder mit Computer und Grafikkarte helfen kann. HINWEIS: Die Selbstdiagnose kann nur ausgeführt werden, wenn kein Videokabel angeschlossen ist und sich der Monitor im Selbsttestmodus befindet. So starten Sie die Selbstdiagnose: 1. Überzeugen Sie sich davon, dass der Bildschirm sauber ist (kein Staub auf dem Bildschirm). 2.
Allgemeine Probleme In der folgenden Tabelle finden Sie grundlegende Informationen zu allgemeinen Monitorproblemen und zu möglichen Lösungen. Allgemeine Symptome Beschreibung Mögliche Lösungen Kein Bild/ Kein Bild BetriebsanzeigeLED leuchtet nicht • Achten Sie darauf, dass das Videosignalkabel richtig und fest an Monitor und Computer angeschlossen ist. • Überzeugen Sie sich davon, dass die Steckdose ausreichend Strom liefert, indem Sie einfach vorübergehend ein anderes Gerät anschließen.
Fehlende Bildpunkte LCD-Bildschirm • Schalten Sie den Monitor aus und wieder ein. weist Punkte auf • Permanent nicht leuchtende Pixel zählen zu den natürlichen Defekten, die bei der LCDTechnologie auftreten können. • Weitere Informationen zu Dell Monitorqualität und Hinweise zu Pixeln finden Sie auf der Dell Support Seite: www.dell.com/pixelguidelines. Dauerhaft LCD-Bildschirm • Schalten Sie den Monitor aus und wieder ein.
Sicherheitsrelevante Themen Sichtbare Anzeichen von Rauch oder Funken • Verzichten Sie auf eigenmächtige Reparaturversuche. • Kontakt zu Dell sofort. Abschaltprobleme Monitor schaltet • Achten Sie darauf, dass das Videosignalkabel sich aus und richtig und fest an Monitor und Computer wieder ein angeschlossen ist. • Setzen Sie den Monitor auf die Werkseinstellungen zurück. • Führen Sie den Monitor-Selbsttest aus und prüfen Sie, ob das Ausschaltproblem auch im Selbsttestmodus auftritt.
Produktspezifische Probleme Spezifische Symptome Beschreibung Mögliche Lösungen Bild ist zu klein Das Bild ist auf • Setzen Sie den Monitor auf die dem Bildschirm Werkseinstellungen zurück. zentriert, füllt aber nicht den gesamten Anzeigebereich aus Der Monitor kann nicht mit den Tasten an der Rückseite eingestellt werden OSD-Menü wird • Schalten Sie den Monitor aus, trennen Sie das nicht am Netzkabel, schließen Sie es wieder an und Bildschirm schalten Sie den Monitor wieder ein.
Universal Serial Bus (USB) spezifische Probleme Spezifische Symptome Beschreibung Mögliche Lösungen USBUSB-Peripherie- • Vergewissern Sie sich, dass der Monitor Schnittstelle geräte funktioeingeschaltet ist. funktioniert nicht nieren nicht • Trennen Sie das Upstream-Kabel zum Computer ab, schließen Sie es anschließend wieder an. • Trennen Sie USB-Peripheriegeräte (Downstream-Anschluss) ab, schließen Sie diese anschließend wieder an. • Schalten Sie den Monitor aus und wieder ein.
Anhang ACHTUNG: Sicherheitshinweise ACHTUNG: Die Verwendung von anderen als in dieser Dokumentation angegebenen Bedienelementen, Anpassungen oder Verfahren kann zu Schock-, elektrischen und/oder mechanischen Gefahren führen. Weitere Informationen über Sicherheitshinweise finden Sie unter Sicherheit, Umweltschutz und Bestimmungen (SERI). FCC-Erklärung (nur für die USA) und weitere rechtliche Informationen Lesen Sie bitte die Webseite über rechtliche Konformität unter www.dell.