Instruction Manual

Removing the Power-Button

Board

WARNING: Before working inside your computer, read the

safety information that shipped with your computer and

follow the steps in

Before Working Inside Your Computer.

After working inside your computer, follow the instructions

in After Working Inside Your Computer. For more safety best

practices, see the Regulatory Compliance home page at

dell.com/regulatory_compliance.

Prerequisites

1 Remove the base cover.

2 Remove the top cover.

Procedure

1 Disconnect the power-button board cable from the system board.

2 Turn the chassis over and remove the antenna cable from the routing

guides on the power-button module.

3 Press the tabs on the power-button module to release the module from

the front panel.

4 Release the tabs at the bottom of the power-button module from the slots

on the chassis.