Instruction Manual

Boot
Boot Option #4 Displays the fourth boot device.
Default: USB Floppy Device.
Boot Option #5 Displays the fifth boot device.
Default: Onboard NIC Device.
Hard Disk Drivers Displays the boot sequence of the
hard drive.
Power
Wake Up by Integrated LAN Allow the computer to be powered
on by special LAN signals.
Deep Sleep Control Allows you to define the controls
when Deep Sleep is enabled.
AC Recovery Sets what action the computer
takes when power is restored.
Auto Power On Allows you to enable or disable the
computer from turning on
automatically.
Auto Power On Mode Allows you to set the computer to
turn on automatically every day or
on a preselected date. This option
can be configured only if the Auto
Power On mode is set to Enabled
Everyday or Selected Day .
Auto Power On Date Allows you to set the date on which
the computer must turn on
automatically. This option can be
configured only if the Auto Power On
mode is set to Enabled 1 to 31.
Auto Power On Time Allows you to set the time at which
the computer must turn on
automatically. This option can be
configured only if the Auto Power On
mode is set to Enabled hh:mm:ss.
78