Service Manual

2 Remove the jumper plug from the password jumper (pin number three and four)

and place it on the CMOS jumper (pin number five and six).

1 jumper plug 2 CMOS jumper (pin number

five and six)

3 password jumper (pin number

three and four)

3 Replace the video-card fan.

4 Replace the processor fan.

5 Replace the top cover.

6 Replace the base cover.

7 Turn on your computer.

A message is displayed to confirm that the CMOS settings are reset and default

BIOS setup has been loaded.

8 Press F1 to continue and wait till the operating system is completely loaded.

9 Shut down your computer.