Users Guide

CAUTION: To avoid damaging the components and cards,

handle them by their edges and avoid touching pins and

contacts.

CAUTION: Only a certified service technician is authorized to

remove the device cover and access any of the components

inside the device. See the safety instructions for complete

information about safety precautions, working inside your

device, and protecting against electrostatic discharge.

CAUTION: Before touching anything inside your device,

ground yourself by touching an unpainted metal surface,

such as the metal at the back of the device. While you work,

periodically touch an unpainted metal surface to dissipate

static electricity, which could harm internal components.

CAUTION: When you disconnect a cable, pull on its connector

or on its pull-tab, not on the cable itself. Some cables have

connectors with locking tabs or thumb-screws that you

must disengage before disconnecting the cable. When

disconnecting cables, keep them evenly aligned to avoid

bending any connector pins. When connecting cables, make

sure that the ports and connectors are correctly oriented

and aligned.

CAUTION: To disconnect a network cable, first unplug the

cable from your device and then unplug the cable from the

network device.

Recommended Tools

The procedures in this document may require the following tools:

• Philips screwdriver