ALIENWARE® DESKTOP MANUAL 01 / 01
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. The contents herein are subject to change without notice. © 2009 Dell Inc. All rights reserved.
CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CHAPTER 1: SETTING UP YOUR DESKTOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Before Setting Up Your Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Connect the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHAPTER 7: SYSTEM RECOVERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 AlienRespawn v2.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Recovery Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Password Protection . . . . . . . . . . . . . . . . . . . .
INTRODUCTION Dear Valued Alienware Customer, Welcome to the Alienware family. We are thrilled to include you among the growing number of savvy high-performance computer users. The Alienware technicians who have crafted your computer have made certain that your high-performance computer is properly optimized and performs to its fullest potential. We build computers with a single unwavering purpose: Build It As If It Were Your Own.
CHAPTER 1: SETTING UP YOUR DESKTOP CHAPTER 1: SETTING UP YOUR DESKTOP CHAPTER 1: SETTING UP YOUR DESKTOP 06 / 06
CHAPTER 1: SETTING UP YOUR DESKTOP Before Setting Up Your Desktop Product Documentation and Media Congratulations on the purchase of your Alienware® Area-51! Read all safety and setup instructions before connecting your new desktop. Begin by carefully opening the box and removing all components that were shipped to you. Before setting up your desktop or components, be sure to inspect all items for any physical damage that may have occurred during shipment.
CHAPTER 1: SETTING UP YOUR DESKTOP Connect the Display Connect the display using the connector available on the graphics card on your computer. NOTE: A DVI, HDMI, or DisplayPort connector may be available on the graphics card you purchased. Connection Type Cable Display DVI-to-DVI (DVI cable) You can purchase the DVI-to-VGA adapter, HDMI-to-DVI adapter, and additional HDMI or DVI cables on the Dell website at www.dell.com.
CHAPTER 1: SETTING UP YOUR DESKTOP Connect the Keyboard and Mouse Connect the Network Cable (Optional) 09 / 09
CHAPTER 1: SETTING UP YOUR DESKTOP Connect the Power Cable WARNING: The power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to a power strip or electrical outlet may cause fire or equipment damage. Press the Power Button Press the power button on the top of the computer.
CHAPTER 1: SETTING UP YOUR DESKTOP Set Up Microsoft Windows Setting Up a Wireless Connection CAUTION: Do not interrupt the operating system’s setup process. Doing so may render your desktop unusable. NOTE: To set up your wireless router, see the documentation that shipped with your router. Your computer is preconfigured with the operating system settings that you selected while ordering your computer. To configure the remaining settings, follow the instructions on the screen.
CHAPTER 1: SETTING UP YOUR DESKTOP Setting Up Your Internet Connection Windows® 7 ISPs and ISP offerings vary by country. Contact your ISP for offerings available in your country. 1. 2. If you cannot connect to the Internet but have successfully connected in the past, the Internet Service Provider (ISP) might have a service outage. Contact your ISP to check the service status, or try connecting again later. Have your ISP information ready.
CHAPTER 2: GETTING TO KNOW YOUR DESKTOP CHAPTER 2: GETTING TO KNOW YOUR DESKTOP CHAPTER 2: GETTING TO KNOW YOUR DESKTOP This chapter provides information about your new desktop to familiarize you with its various features, and to get you up and running quickly.
CHAPTER 2: GETTING TO KNOW YOUR DESKTOP Front View Features 1 Power button — Turns the computer on or off when pressed. This button illuminates indicating that the computer is turned on. The color of the button rim indicates the power status. • Off — the computer is either turned off, in hibernate mode, or is not receiving power. • Solid white — the computer is on. • Blinking white — the computer is in standby mode. 2 Optical drive — Plays or records CDs, DVDs, and Blu-ray discs.
CHAPTER 2: GETTING TO KNOW YOUR DESKTOP Back View Features 1 1 Security lock slot — Attaches a commercially available security cable to the computer. NOTE: Before you buy a security cable, ensure that it works with the security lock slot on your computer. 2 Back panel connectors — Connects USB, audio, and other devices into the appropriate connectors. For more information, see “Back Panel Connectors” on page 16. 3 Expansion card slots — Access connectors for any installed PCI and PCI express cards.
CHAPTER 2: GETTING TO KNOW YOUR DESKTOP Back Panel Connectors 1 9 2 8 3 7 4 1 PS/2 Keyboard connector — Connects to a standard PS/2 keyboard. 2 Optical S/PDIF connector — Connects to amplifiers, speakers, or TVs for digital audio output through optical digital cables. This format carries an audio signal without going through an analog audio conversion process. 3 USB 2.0 connectors (6) — Connects to USB devices, such as a mouse, keyboard, printer, external drive, or MP3 player.
CHAPTER 2: GETTING TO KNOW YOUR DESKTOP Back Light Button Top View Features Press the back light button to turn on the light to view the back panel connectors. This light automatically turns off after a few seconds. Press the top panel downwards to access the top panel connectors.
CHAPTER 2: GETTING TO KNOW YOUR DESKTOP Top Panel Connectors 1 2 3 4 5 1 USB 2.0 connectors (3) — Connects to USB devices, such as a mouse, keyboard, printer, external drive, or MP3 player. 2 eSATA connector — Connects to eSATA compatible storage devices such as external hard drives or optical drives. 3 IEEE 1394 — Connects to high speed serial multimedia devices such as digital video cameras. 4 Headphone connector — Connects to headphones.
CHAPTER 3: CONNECTING DEVICES CHAPTER 3: CONNECTING DEVICES CHAPTER 3: CONNECTING DEVICES This chapter provides information about connecting optional devices to your desktop to enhance your audio, video, and digital experience.
CHAPTER 3: CONNECTING DEVICES Connecting External Speakers Your Alienware desktop has five integrated audio out connectors and one audio in connector. The audio out connectors deliver quality sound and support 7.1 surround audio. You can connect the audio input connector from a home stereo or speaker system for a heightened gaming and media experience. NOTE: On computers with a sound card, use the connector on the card. 1 2 3 1 Side L/R surround connector — Connects to side L/R surround speakers.
CHAPTER 3: CONNECTING DEVICES Connecting Printers Two types of audio connectors: Connecting a Plug and Play Printer 1 2 1 Stereo jack — Your headphone jack should have this type of connector. 2 Mono jack — Your microphone jack should have this type of connector. If your printer supports plug and play, your operating system will detect it and attempt to install the printer automatically. In some cases, Windows may require a driver for the printer.
CHAPTER 3: CONNECTING DEVICES Connecting a Non Plug and Play Printer Connecting USB Devices Windows Vista® Connect USB devices into an available USB connector on your desktop. Microsoft Windows will detect the device and attempt to install the appropriate driver automatically. In some cases, Windows may require a driver. This driver is located on the software CD that is included with the device. 1. Click Start → Control Panel. 2. Click Hardware and Sound→ Add a printer. 3.
CHAPTER 4: USING YOUR DESKTOP CHAPTER 4: USING YOUR DESKTOP CHAPTER 4: USING YOUR DESKTOP 023 / 023
CHAPTER 4: USING YOUR DESKTOP Alienware Command Center Thermal Controls The Alienware® Command Center gives you access to Alienware’s exclusive software and is a continuously upgradable control panel. As Alienware releases new programs, they download directly into the Command Center allowing you to build a library of system management, optimization, and customization tools.
CHAPTER 4: USING YOUR DESKTOP RAID Level 0 RAID Level 1 CAUTION: RAID level 0 provides no redundancy. Therefore, a failure of one drive results in the loss of all data. Perform regular backups to protect your data. RAID level 0 uses data striping to provide a high data access rate. Data striping writes consecutive segments, or stripes, of data sequentially across the physical drive(s) to create a large virtual drive.
CHAPTER 4: USING YOUR DESKTOP RAID Level 5 RAID Level 10 RAID level 5 uses data parity. RAID level 5 stripes both data and parity information across three or more drives. It provides data striping at the byte level and also stripe error correction information (rotating parity array). This results in excellent performance and good fault tolerance. RAID 10, a combination of RAID 1 and RAID 0, uses disk striping across mirrored disks. It provides high data throughput and complete data redundancy.
CHAPTER 4: USING YOUR DESKTOP Optimizing Performance Your computer has been configured to operate optimally across a wide range of applications. Depending on the configuration you purchased, the computer may have been overclocked at the factory to achieve maximum performance in resource intensive applications including gaming and multimedia development. CAUTION: Technical support verifies the full functionality of the computer at the factory configured settings.
CHAPTER 4: USING YOUR DESKTOP Configuring the BIOS System Setup The System Setup options allow you to: • • • Change the system configuration information after you add, change, or remove any hardware in your desktop. Set or change a user-selectable option. View the installed amount of memory or set the type of hard drive installed. Before you use System Setup, it is recommended that you write down the current System Setup information for future reference.
CHAPTER 4: USING YOUR DESKTOP System Setup Options NOTE: The items listed in this section may or may not appear exactly as listed depending on your computer model and installed devices. NOTE: For the updated system setup information, see the Service Manual at support.dell.com/manuals. System Information Product Name Displays the product name. BIOS Version Displays the BIOS version, number, and date information. Input Service Allows you to input the service tag.
CHAPTER 4: USING YOUR DESKTOP Standard CMOS Features System Time Displays the current time. (hh:mm:ss) System Date Displays the current date. (mm:dd:yy) SATA 1 Displays the SATA 1 drive integrated in your computer. SATA 2 SATA 3 SATA 4 SATA 5 SATA 6 SATA 7 SATA 8 Displays the SATA 2 drive integrated in your computer. Displays the SATA 3 drive integrated in your computer. Displays the SATA 4 drive integrated in your computer. Displays the SATA 5 drive integrated in your computer.
CHAPTER 4: USING YOUR DESKTOP CPU Configuration XD Bit Capability Enable XD Bit Capability to allow the processor to distinguish between the bits of code that can be executed and the ones that cannot be executed. Integrated Devices LAN1 BCM5784 Device Allows you to enable or disable the onboard LAN1 controller. LAN1 Option ROM Allows you to enable or disable the network controller’s boot option. LAN2 BCM5784 Device Allows you to enable or disable the onboard LAN2 controller.
CHAPTER 4: USING YOUR DESKTOP Power Management Setup Suspend Mode Sets the energy-saving mode of the ACPI function. AC Recovery Sets what action the computer takes when power is restored. Remote Wakeup Auto Power On Frequency/Voltage Control CPU Speed Memory Speed Current QPI Speed Frequency/Voltage Control CPU Core (Non-Turbo) Ratio Displays the ratio between the processor core clock and the FSB frequency.
CHAPTER 4: USING YOUR DESKTOP Advance DRAM Configuration Submenu Memory-Z Opens submenu to display the SPD configuration for each memory module. Advanced Memory Settings Allows you to toggle to Manual mode and set all of the timing parameters. tCL Displays the Column Address Strobe Latency (editable in Manual Mode). tRCD Displays timing of RAS to CAS delay (editable in Manual Mode). tRP Displays timing of RAS Precharge (editable in Manual Mode).
CHAPTER 4: USING YOUR DESKTOP Overvoltage Configuration Submenu CPU Temperature Sensor VCore Dynamic CPU VCore Offset DDR3 Memory Voltage IOH Voltage QPI and Uncore Voltage BIOS Security Features Change Supervisor Password Change User Password Exit Exit Options Displays the processor temperature in Celsius and Fahrenheit. Displays processor Core voltage. Processor Core Voltage Offset. Adjust the DDR3 Memory Voltage. Adjust the IOH Voltage. Adjust QPI and Uncore Voltage.
CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS This chapter provides guidelines and instructions for increasing the processing power and storage space by upgrading equipment. You can purchase components for your desktop at www.dell.com or www.alienware.com. NOTE: See the Service Manual at support.dell.com/manuals for installation instructions of all serviceable components.
CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS Before You Begin This section provides procedures for removing and installing the components in your desktop. Unless otherwise noted, each procedure assumes that the following conditions exist: • • • You have performed the steps in “Turning Off Your Desktop” and “Before Working Inside Your Desktop” in this section. You have read the safety information that shipped with your desktop.
CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS Before Working Inside Your Desktop To avoid damaging the desktop, perform the following steps before you begin working inside the desktop. Use the following safety guidelines to help protect your desktop from potential damage and to help to ensure your own personal safety. 1. WARNING: Before working inside your desktop, read the safety information in the “SAFETY, ENVIRONMENTAL, AND REGULATORY INFORMATION“ that shipped with your computer.
CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS Opening and Closing the Side Panel CAUTION: Before opening the side panel, disconnect the power cable from your desktop. 1. Follow the instructions in “Before You Begin” on page 36. NOTE: Ensure that any attached security cable is removed before attempting to lift the release panel. 2. 2 Lift the release panel to open the side panel. 1 NOTE: Theater lighting turns on automatically when the side panel is removed.
CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS Inside View of Your Computer 1 2 1 memory module connectors (3) 2 expansion card slots (6) 039 / 039
CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS Removing and Replacing Memory Module(s) To replace memory module(s): 1. 1. Follow the instructions in “Before You Begin” on page 36. 2. Open the side panel (see “Opening and Closing the Side Panel“ on page 38). 3. Locate the memory module connectors on the system board (see “Inside View of Your Computer“ on page 39). Align the notch on the bottom of the memory module with the tab on the memory module connector.
CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS CAUTION: To avoid damage to the memory module, press the memory module straight down into the memory module connector while you apply equal force to each end of the memory module. 2. Insert the memory module into the memory module connector until the memory module snaps into position. NOTE: If the memory module is not installed properly, the computer may not boot.
CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS Removing and Replacing Hard Drive(s) 1. 2. 3. Press the two release tabs together and slide the hard drive towards the top and out of the computer. Follow the instructions in “Before You Begin” on page 36. Lift the release panel to open the side panel on the right side.
CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS To replace a hard drive: 1. See the documentation that shipped with your new hard drive to verify that it is configured for your computer. 2. Slide the new hard drive into the hard drive bay and press it down until the hard drive snaps into place. 3. Close the side panel on the right side. 4. Reconnect the power cable, and all the external peripherals to the computer. 5. Turn on the computer.
CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS Removing and Replacing Expansion Card(s) 1. Follow the instructions in “Before You Begin” on page 36. 2. Open the side panel (see “Opening and Closing the Side Panel“ on page 38). 3. Press the shroud button to release the shroud and then rotate the shroud away from the computer. 4. Locate the expansion card on the system board (see “Inside View of Your Computer“ on page 39). 5. Disconnect any cables connected to the card (if applicable). 6.
CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS 3. Align the card with the connector on the system board. 4. Place the card in the connector and press down firmly. Ensure that the card is firmly seated in the connector. If you are installing the PCI Express card into the x16 card connector, gently push the retention mechanism and place the card in the connector.
CHAPTER 6: TROUBLESHOOTING CHAPTER 6: TROUBLESHOOTING CHAPTER 6: TROUBLESHOOTING 046 / 046
CHAPTER 6: TROUBLESHOOTING Basic Hints and Tips When troubleshooting your computer, remember the following safety guidelines: • Computer does not turn on: Is your computer securely connected to a working electrical outlet? If connected to a power strip, ensure that the strip is actually working. • Before touching any of the computer’s internal components, touch an unpainted portion of the chassis. Doing so will safely discharge any static electricity, which could damage your computer.
CHAPTER 6: TROUBLESHOOTING Software Diagnostic Tools If the Pre-boot System Assessment completes successfully, the following message will appear on your screen. Pre-Boot System Assessment (PSA) “Do you want to run the remaining memory tests? This will take about 30 minutes or more. Do you want to continue? (Recommended).” The computer runs the Pre-boot System Assessment (PSA), a series of initial tests for the system board, keyboard, display, memory, hard drive, and so on. To invoke PSA: 1. 2. 3. 4.
CHAPTER 6: TROUBLESHOOTING Alienware® Diagnostics If you experience a problem with your Alienware desktop, run the Alienware Diagnostics. It is recommended that you print these procedures before you begin. NOTE: Back up all data before initiating a system recovery. Backup functionality is included in AlienRespawn™ v2.0, but as a precaution it would be better to backup critical files onto an external media before initiating recovery. NOTE: The Support CD/DVD contains drivers for your computer.
CHAPTER 6: TROUBLESHOOTING Answers to Common Problems An audio CD does not produce sound The computer does not recognize the disc or drive • • • CD-ROM, DVD-ROM, CD-R/W, DVD±R/W, or Blu-ray Disc™ Drive • • • • • • Check to see if the disc is properly inserted into the drive with the label facing up. Try another disc. Shut down and restart the computer. Clean the disc. Restart the computer and enter the BIOS setup utility by pressing as the computer restarts.
CHAPTER 6: TROUBLESHOOTING Computer The computer stops responding or a solid blue screen appears The computer fails the POST: The computer POST (Power On Self Test) ensures that all hardware is working properly before starting the remainder of the boot process. If the computer passes the POST, the computer will continue to start normally. However, if the computer fails the POST, the computer will emit a series of beeps during startup if the monitor cannot display errors or problems.
CHAPTER 6: TROUBLESHOOTING A program is designed for an earlier version of Microsoft® Windows® Run the Program Compatibility Wizard: The Program Compatibility Wizard configures a program so that it runs in an environment similar to non-Windows operating system environment. Windows Vista® 1. 2. Click Start → Control Panel→ Programs→ Use an older program with this version of Windows. In the welcome screen, click Next. Follow the instructions on the screen.
CHAPTER 6: TROUBLESHOOTING Hard Drive Problems Internet Allow the computer to cool before turning it on Cannot browse the Internet or the Unable to locate host error message appears A hot hard drive may prevent the operating system from starting. Try allowing the computer to return to room temperature before turning it on. Run Check Disk: • • Windows Vista® or Windows® 7 • 1. Click Start → Computer. 2. Right-click Local Disk C: 3. Click Properties→ Tools→ Check Now.
CHAPTER 6: TROUBLESHOOTING Keyboard Memory The keyboard is not responding Memory errors detected on start up Clean the keyboard by using an aerosol can of compressed air with a proper extension to remove dust and lint trapped under the keys. • Check memory modules for correct seating and orientation. Reseat the memory modules if applicable. For more information, see “Removing and Replacing Memory” on page 40.
CHAPTER 6: TROUBLESHOOTING Display Mouse If the display is blank The mouse is not working The computer may be in a power saving mode: • Press a key on the keyboard or press the power button to resume normal operation. • Test the electrical outlet: • • Ensure that the electrical outlet is working by testing it with another device, such as a lamp. • Check if the mouse cable is properly connected to the USB connector on your computer. Check if the mouse cable is damaged.
CHAPTER 6: TROUBLESHOOTING Power Printer When you press the power button, the computer does not turn on The printer does not turn on • If the computer is connected to a surge protector or UPS, make sure that the surge protector or UPS is securely connected to an electrical outlet, is switched on and is working correctly. • • • Ensure that the electrical outlet is working properly by testing another device such as a radio or lamp that you know works.
CHAPTER 6: TROUBLESHOOTING Game Controllers Speakers The computer does not recognize the game controller There is no sound from the speakers • Ensure that subwoofer and the speakers are turned on: • Check if the cable connecting the game controller to the computer is not damaged and that it is properly connected. Reinstall the device driver for the game controller. See the documentation that shipped with your speakers.
CHAPTER 7: SYSTEM RECOVERY CHAPTER 7: SYSTEM RECOVERY CHAPTER 7: SYSTEM RECOVERY Your computer ships with the following media: • • Recovery CD or DVD — Contains operating system installation media. Support CD or DVD — Contains drivers for your computer. You can also download the latest drivers and software for your computer from support. dell.com. • Optional AlienRespawn v2.0 disc (if ordered) — Contains the AlienRespawn recovery image. NOTE: Your computer ships with either AlienRespawn v2.
CHAPTER 7: SYSTEM RECOVERY AlienRespawn v2.0 NOTE: Back up all data before initiating a system recovery. Backup functionality is included in AlienRespawn™ v2.0, but as a precaution it is recommended to backup critical files onto an external media before initiating recovery. AlienRespawn™ v2.
CHAPTER 7: SYSTEM RECOVERY Recovery Options NOTE: Back up all data before initiating a system recovery. Backup functionality is included in AlienRespawn v2.0, but as a precaution it is recommended to backup critical files onto an external media before initiating recovery. AlienRespawn v2.0 offers three methods for system recovery. Each option offers a unique combination of restoration and data-backup features. The details of each method are described below.
CHAPTER 7: SYSTEM RECOVERY Password Protection Since AlienRespawn v2.0 has the ability to reformat your hard drive and can be accessed without entering Windows, the password-protection functionality has been included for your security. This feature is disabled by default, but can be enabled through the Respawn Settings application, described below. CAUTION: If you forget your password, you will not be able to access AlienRespawn v2.0, except by booting to the optional AlienRespawn v2.
CHAPTER 7: SYSTEM RECOVERY AlienRespawn v2.0 Disc Dell DataSafe Local Backup If you ordered the optional AlienRespawn v2.0 disc, you will receive it along with your computer. This disc will allow you to re-deploy AlienRespawn v2.0 to a new hard drive in the event of a hard drive failure. Dell DataSafe Local Backup is a backup and recovery application that can restore your computer if you lose data due to a virus attack, accidentally delete critical files or folders, or if the hard drive crashes.
CHAPTER 7: SYSTEM RECOVERY To restore data: 1. 2. Turn off your computer. Disconnect all the devices connected to the computer (such as USB drive, printer, etc.) and remove any recently added internal hardware. NOTE: Do not disconnect the monitor, keyboard, mouse, and the power cable. 3. Turn on your computer. 4. When the Alienware logo appears, press several times to access the Advanced Boot Options window.
CHAPTER 8: BASIC SPECIFICATIONS CHAPTER 8: BASIC SPECIFICATIONS CHAPTER 8: BASIC SPECIFICATIONS This chapter provides the basic specifications of your desktop. For more detailed specifications, see the Comprehensive Specifications at support.dell.com/manuals.
CHAPTER 8: BASIC SPECIFICATIONS Computer Model Memory Alienware Area-51 Connectors three internally-accessible DDR3 DIMM sockets Dimensions Capacities 2 GB and 4 GB Width 249 mm (9.8 inches) Memory types DDR3 and DDR3-XMP Depth 635 mm (25 inches) Minimum 6 GB Height 557.6 mm (22 inches) (with top vents closed) Maximum 12 GB 595.5 mm (23.4 inches) (with top vents open) Weight (starting at) 15.4 mm (0.
CHAPTER 8: BASIC SPECIFICATIONS Top Panel Connectors Expansion Bus IEEE 1394 one 6-pin serial connector PCI: USB three 4-pin USB 2.
CHAPTER 8: BASIC SPECIFICATIONS Power Voltage Computer Environment 100-240 V AC, 50-60 Hz NOTE: For information on voltage settings, see the safety information that shipped with your computer.
APPENDIX A: GENERAL AND ELECTRICAL SAFETY PRECAUTIONS APPENDIX A: GENERAL AND ELECTRICAL SAFETY PRECAUTIONS Computer Setup Computer Use • • • • • • • • • • • Read all instructions marked on the product and in the documentation before operating your computer. Retain all safety and operating instructions. Never use this product near water or a heat source. Only set-up the computer on a stable work surface. Only operate the computer using the power source type indicated on the rating label.
APPENDIX A: GENERAL AND ELECTRICAL SAFETY PRECAUTIONS Computer technicians wear a special wrist-strap that grounds them to the computer’s case to prevent ESD damage. You can reduce the chances of ESD damage by doing the following: • • • • • Turn off your computer’s power and wait several minutes before starting to work. Ground yourself by touching the case of the computer. Touch only those items which must be replaced.
APPENDIX B: CONTACTING ALIENWARE APPENDIX B: CONTACTING ALIENWARE NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Because availability varies by country and product, some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1. Visit www.dell.
APPENDIX C: IMPORTANT INFORMATION APPENDIX C: IMPORTANT INFORMATION NVIDIA GeForce GTX 295 Graphics Cards • When you utilize dual NVIDIA GeForce GTX 295 graphics cards in a Quad SLI configuration, HDMI output is not supported. NOTE: NVIDIA GeForce GTX 295 graphics card’s HDMI output is limited to single-card configurations only. • • When Quad SLI is enabled on a GeForce GTX 295 graphics card, the video quality can be optimized using the Dual Link DVI.
Printed in China. Printed on recycled paper.