Service Manual

Table 5. System setup options—OC menu
OC
Intel CPU Allows you to set OC mode and Custom Pstate0 for the
CPU.
Intel Memory Allows you to set the overclocking.
Table 6. System setup options—Security menu
Security
Unlock Setup Displays if the setup status is unlocked.
Admin Password Allows you to set the administrator password. The
administrator password controls access to the system setup
utility.
System Password Allows you to set the system password. The system password
controls access to the computer at boot.
HDD Password Status Displays if the HDD password is clear or set.
Default: Not set.
HDD1 Password Status Displays if the HDD password is clear or set.
Default: Not set.
HDD2 Password Status Displays if the HDD password is clear or set.
Default: Not set.
HDD3 Password Status Displays if the HDD password is clear or set.
Default: Not set.
Password Change Allows you to permit or deny system password or HDD
password changes. Default: Permitted
Computrace Enable or disable the BIOS module interface of the optional
Computrace Service from Absolute Software.
Firmware TPM Enable or disable the firmware TPM.
Default: Enabled.
UEFI Firmware Capsule Updates Enable or disable BIOS updates through UEFI capsule
update packages.
Default: Enabled.
Table 7. System setup options—Boot menu
Boot
Boot Configuration
Wait for ‘F1’ If Error Allows you to enable or disable the F1 screen. Default: All,
but KB.
Secure Boot Control Allows you to enable or disable the secure boot control.
Default: Disabled.
Load Legacy OPROM Default: Enabled.
Set Boot Priority
Boot List Option Allows you to select the boot list option.
Default: Legacy.
USB Boot Support Allows you to enable or disable USB Boot support. Default:
Enabled.
115