Service Manual

Replacing the memory modules

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Procedure

1. Align the notch on the memory module with the tab on the memory-module slot.

2. Insert the memory module into the memory-module connector until the memory module snaps into position and the securing clip

locks in place.

NOTE: The securing clips return to the locked position. If you do not hear the click, remove the memory module and

reinstall it.

Post-requisites

1. Replace the left and right side-panels. See “

Replacing the side panels”.

2. Replace the

stability foot.