Service Manual

Removing the handle bars

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Prerequisites

1. Remove the

stability foot.

2. Remove the left and right side-panels. See “Removing the side panels”.

Procedure

1. Remove the seven screws (#6-32x6.5) that secure the rear handle-bar to the left side of the chassis.

2. Remove the seven screws (#6-32x6.5) that secure the rear handle-bar to the right side of the chassis.

3. Press the rear-handle bar to release the securing tab and remove the rear-handle bar.