Service Manual

Replacing the battery case
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the battery case with the screw holes on the chassis.
2 Replace the two screws (#6-32x5.2) that secure the battery case to the chassis.
3 Route the battery-case cable through the routing guides on the chassis.
4 Connect the battery-case cable to the I/O board.
Post-requisites
1 Replace the battery.
2 Replace the right side-panel. See “Replacing the side panels”.
3 Replace the stability foot.
33