Service Manual

Steps

1. Adhere the coin-cell battery to the slot on the palm-rest assembly.

2. Connect the coin-cell battery to the system board.

Next steps

1. Install the card-reader board.

2. Install the solid-state drive in M.2 slot two.

3. Install the

battery.

4. Install the base cover.

5. Follow the procedure in After working inside your computer.

Computer base

Removing the computer base

Prerequisites

1. Follow the procedure in

Before working inside your computer.

2. Remove the

base cover.

3. Remove the battery.

4. Remove the wireless card.

5. Remove the solid-state drive from M.2 slot one.

6. Remove the

rear-I/O cover.

About this task

The following image indicates the location of the computer base and provides a visual representation of the removal procedure.