Service Manual

Table 5. System setup options—Advanced menu (continued)
Advanced
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
USB Wake Support (S3) Allows you to enable the USB devices to wake the system
from Standby.
USB PowerShare (S4/S5) Allows you to charge external devices.
USB PowerShare Wake Support (S4/S5) Allows you to enable front the USB devices to wake the
system from S4/S5.
Auto Power On
Auto Power On Mode Allows you to set the computer to turn on automatically every
day or on a preselected date. This option can be configured
only if the Auto Power On mode is set to Enabled Everyday or
Selected Day.
Auto Power On Date Allows you to set the date on which the computer must turn
on automatically. This option can be configured only if the Auto
Power On mode is set to Enabled 1 to 31.
Auto Power On Time Allows you to set the time at which the computer must turn
on automatically. This option can be configured only if the Auto
Power On mode is set to Enabled hh:mm:ss.
Numlock Key Allows you to set the status of the Num Lock key during boot
to On or Off.
Performance Options
Overclocking Feature
Core Over Clocking Level Allows you enable or disable the OC level1/level2 setting
and adjust the processor flex ratio and voltage in the
Customization mode.
Computrace Allows you to enable or disable the Computrace service using
the Absolute software.
Core Ratio Limit Override Allows you to set the core ratio limit.
Single Core Allows you to select single core or multiple cores.
Core Voltage Mode Allows you to select between adaptive and override voltage
modes.
Core Voltage Offset Allows you to set the override value of core voltage.
Long Duration PWR Limit Allows you to set the turbo mode power limit.
Short Duration PWR Limit Options Allows you to set the turbo mode power limit.
XMP Memory Allows you to set the XMP memory.
Table 6. System setup options—Security menu
Security
Admin Password Status Displays whether the admin password is set.
System Password Status Displays whether the system password is set.
HDD Password Status
Displays if the hard drive password is set.
Admin Password Displays the admin password.
System Password Displays the system password.
HDD Password
Displays the hard drive password.
Firmware TPM
Displays the firmware TPM.
104 Rendszerbeállítás