Service Manual
Table Of Contents
- Alienware Aurora R12 Service Manual
- Contents
- Working inside your computer
- Removing and installing components
- Inside view of your computer
- System-board components
- Recommended tools
- Screw list
- Left-side cover
- Top cover
- Right-side cover
- Right tron-light board
- 2.5-inch hard drive
- 3.5-inch hard drive
- 2.5-inch hard-drive cage
- 3.5-inch hard-drive cage
- 550 W power-supply unit
- 1000 W Power-supply unit
- Coin-cell battery
- Memory modules
- Single-graphics card
- Solid-state drive
- Front bezel
- Top bezel
- Bottom cover
- Processor fan and heat-sink assembly
- Processor liquid-cooling assembly
- Processor
- Wireless card
- Antennas
- Front I/O-panel
- Front-chassis fan
- Top-chassis fan
- Front AlienFX LED boards
- Power-button board
- System board
- Device drivers
- System setup
- Troubleshooting
● Optical Drive (if available)
● SATA Hard Drive (if available)
● Diagnostics
The boot sequence screen also displays the option to access the System Setup screen.
System setup options
NOTE: Depending on your computer and its installed devices, the items listed in this section may or may not appear.
Table 4. System setup options—Main menu
Main
System Time Displays the current time in hh:mm:ss format.
System Date Displays the current date in mm/dd/yyyy format.
BIOS Information
BIOS Version Displays the BIOS version number.
Product Information
Product Name Displays the product name. Default: Alienware Aurora R11
Service Tag Displays the service tag of your computer.
Asset Tag Displays the asset tag of your computer.
CPU Information
CPU Type Displays the processor type
CPU Speed Displays the speed of the processor.
CPU ID Displays the processor identification code.
Cache L1 Displays the processor L1 cache size.
Cache L2 Displays the processor L2 cache size.
Cache L3 Displays the processor L3 cache size.
Memory Information
System Memory Displays the total computer memory installed.
Memory Speed Displays the memory speed.
Table 5. System setup options—Advanced menu
Advanced
Advanced BIOS Features
SATA Operation Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Power Options
Numlock Key Allows you to set the status of the Num Lock key during boot to
On or Off.
Wake Up by Integrated LAN Allow the computer to be powered on by special LAN signals.
AC Recovery Sets what action the computer takes when power is restored.
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
USB Wake Support (S3) Allows you to enable the USB devices to wake the system from
Standby.
USB PowerShare (S4/S5) Allows you to charge external devices.
98