User guide

30
CHAPTER 3: USING YOUR DESKTOP
Advanced — Frequency/Voltage Control
Advance DRAM
Conguration
Allows you to access the Advance DRAM
Conguration submenu.
Overclock Conguration
Allows you to access the Overclock
Conguration submenu.
Overvoltage
Conguration
Allows you to access the Overvoltage
Conguration submenu.
Load Level 1 Defaults
Allows you to load Level 1 default setting.
NOTE: is setting may not be available for
some processors.
Load Level 2 Defaults
Allows you to load Level 2 default setting.
NOTE: is setting may not be available for
some processors.
Advanced — ME Subsystem
ME Version
Displays the ME version number.
ME subsystem
Allows you to enable or disable the ME
subsystem.
End of Post Message
Allows you to enable or disable the End of Post
Message.
Advanced — ME Subsystem
Execute MEBx
Allows you to enable or disable the Execute
MEBx.
Integrated Clock Chip
Conguration
Allows you to access the Integrated Clock Chip
Conguration submenu.
Advanced — ME Subsystem — Integrated Clock Chip Conguration Submenu
ICC OverClocking Lib
Version
Displays the ICC OverClocking Lib Version
number.
Number of ICC Proles:
Displays the number of ICC Proles supported
on your computer.
Current ICC Prole
Index:
Displays the current ICC Prole Index value.
ICC Enable
Allows you to enable or disable the Integrated
Clock Chip.
Advance DRAM Conguration Submenu
Memory-Z
Opens submenu to display the SPD
conguration for each memory module.
Command Rate
Displays the Command Rate (editable in
Manual Mode).
tCL
Displays the Column Address Strobe Latency
(editable in Manual Mode).