User Manual


4. Route and connect the cables that you removed from the connectors on the master I/O board.

5. Replace the PCI-fan assembly (see Replacing the PCI-Fan Assembly).

6. Replace the drive-bay shroud (see Replacing the Drive-Bay Shroud).

7. Close the PCI shroud (see Closing the PCI Shroud).

8. Replace the left side-panel (see Replacing the Left Side-Panel).


9. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page

NOTE: For information on master I/O board connectors, see Master I/O Board Components.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.