User Manual

1. Follow the instructions in Before You Begin.

2. Align the screw holes on the processor liquid-cooling assembly with the screw holes on the chassis rear wall.

3. Replace the four screws that secure the processor liquid-cooling assembly to the chassis rear wall.

4. Tighten the four captive screws that secure the processor liquid-cooling assembly to the system board.

5. Connect the processor liquid-cooling assembly cables to the SYS FAN and CPU PUMP connectors on the top lighting-board.

6. Close the PCI shroud (see Closing the PCI Shroud).

7. Replace the left side-panel (see Replacing the Left Side-Panel).


8. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.