User Manual

Back to Contents Page

 Processor

Alienware Aurora Service Manual

Removing the Processor

Replacing the Processor



Removing the Processor



1. Follow the instructions in Before You Begin.



2. Remove the left side-panel (see Removing the Left Side-Panel).



3. Remove the processor liquid-cooling assembly (see Removing the Processor Liquid-Cooling Assembly).



4. Press and push the release lever down and out and release it from the tab that secures it.



5. Open the processor cover and gently lift the processor to remove it from the socket.



6. Leave the release lever extended in the release position so that the socket is ready for the new processor.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: Do not operate your computer with any cover(s) (including computer panels, bezels, filler brackets, etc.) removed.

WARNING: To guard against likelihood of electric shock, laceration by moving fan blades, or other unexpected injuries, always unplug your

computer from the electrical outlet before removing the side panel(s).

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is

not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

WARNING: Despite having a plastic shield, the processor liquid-cooling assembly may be very hot during normal operation. Ensure that it has had

sufficient time to cool before you touch it.

processor

center-cover latch

tab

release lever

processor cover

CAUTION: When removing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket.