User Manual

CPU Information
CPU Type
Displays the processor type.
CPU ID
Displays the processor identification code.
CPU Speed
Displays the processor speed.
Cache L2
Displays the processor L2 cache size.
Cache L3
Displays the processor L3 cache size.

Advanced — Standard CMOS Features
System Date
(mm:dd:yy)
Displays current date.
System Time
(hh:mm:ss)
Displays the current time.
Device Information
SATA Port1
Displays the SATA 1 drive integrated in the computer.
SATA Port2
Displays the SATA 2 drive integrated in the computer.
SATA Port3
Displays the SATA 3 drive integrated in the computer.
SATA Port4
Displays the SATA 4 drive integrated in the computer.
SATA Port5
Displays the SATA 5 drive integrated in the computer.
SATA Port6
Displays the SATA 6 drive integrated in the computer.
SATA Port7
Displays the SATA 7 drive integrated in the computer.
SATA Port8
Displays the SATA 8 drive integrated in the computer.
Wait for `F1' If Errors
If enabled, the system will HALT during boot to display system errors.

Advanced — Advanced BIOS
Features

Bootup Num-Lock
Select power-on state for num-lock.
OptionROM Display Screen
Allows you to enable or disable the RAID Option ROM screen during POST.

Advanced — CPU Configuration

Hyper-threading Technology
If disabled only one thread per enabled core is active.
XD Bit Capability
Enable XD Bit Capability to allow the processor to distinguish between the bits of code that can be executed and the
ones that cannot be executed.
Intel(R) Speedstep tech
If enabled, the processor clock speed and core voltage are adjusted dynamically based on the processor load.
Intel(R) C-State Tech
If enabled, C-State: Processor idle is set to C2/C3/C4.

Advanced — Integrated Devices

USB Controller
Allows you to enable or disable the integrated USB controller.
HD Audio
Allows you to enable or disable the integrated audio controller.
Onboard IEEE1394 Controller
Allows you to enable or disable the onboard IEEE 1394 controller.
Onboard LAN Controller
Allows you to enable or disable the onboard LAN controller.
LAN Option ROM
Allows you to enable or disable the network controller's boot option.
Jmicron 362 ATA Controller
Allows you to enable or disable the ATA controller.
ICH SATA Configuration

SATA Mode
Allows you to configure the integrated hard drive controller to AHCI or RAID.

Advanced — Power Management Setup
Suspend Mode
Sets the energy-saving mode of the ACPI function.
AC Recovery
Sets what action the computer takes when power is restored.
Auto Power On
Allows the computer to start up at a certain time.

Advanced — Frequency/Voltage Control
Current CPU Frequency
Displays the current processor speed.
Current DRAM Frequency
Displays the current memory speed.
Adjust Cpu Ratio
Allows you to change the processor ratio.
Memory Ratio
Allows you to change the memory ratio.
Extreme Memory Profile (X.M.P)
Allows you to change the extreme memory profile value.
DRAM Timing Mode
Allows you to change the memory timing mode.