User Manual


4. Connect the cables to the connectors on the top lighting-board.

5. Replace the Media Card Reader (if applicable) (see Replacing the Media Card Reader).

6. Replace the optical drive(s) (if applicable) (see Replacing the Optical Drive(s)).

7. Replace the left side-panel (see Replacing the Left Side-Panel).


8. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.