Service Manual

Replacing the hard-drive cage
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Insert the hard-drive cage into its slot on the chassis.
2 Align the tabs on the cage with the tabs on the chassis.
3 Replace the two screws (#6-32 X 1/4") that secure the hard-drive cage to the chassis.
Post-requisites
1 Replace the 3.5-inch hard drive.
2 Replace the left-side cover.
44