Manual


2. Turn off your computer (see Turning Off Your Computer).


3. Disconnect all telephone or network cables from the computer.

4. Press and eject any installed cards from the 3-in-1 Media Card Reader.

5. Disconnect your computer and all attached devices from their electrical outlets.


6. Remove the battery pack (see Removing the Battery Pack).

7. Turn the computer top-side up, open the display, and press the power button to ground the system board.
Back to Contents Page

CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery Pack) before working inside the
computer.