Service Manual

Steps

1. Open the latch and disconnect the keyboard-controller board-cable from keyboard-controller board.

2. Lift the keyboard-controller board-cable off the palm-rest assembly.

3. Open the latch and disconnect the keyboard cable from the keyboard-controller board.

4. Fold up the keyboard cable.

5. Open the latch and disconnect the touchpad cable from the touchpad.

6. Lift the touchpad cable from the palm-rest assembly.

7. Remove the four (M2x1.9) screws that secure the touchpad to the palm-rest assembly.

8. Lift the touchpad off the palm-rest assembly.

Installing the touchpad

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

The following image(s) indicate the location of the touchpad and provides a visual representation of the installation procedure.