Service Manual

About this task

The following image(s) indicate the location of the power-button assembly and provides a visual representation of the removal

procedure.

Steps

1. Remove the three (M2x1.9) screws that secure the power-button bracket to the palm-rest assembly.

2. Lift the power-button bracket off the power-button assembly.

3. Peel the power-button assembly and its cable off the palm-rest assembly.

Installing the power-button assembly

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

The following image(s) indicate the location of the power-button assembly and provides a visual representation of the installation

procedure.