Service Manual

Steps

To install the palmrest perform the post-requisites.

Next steps

1. Install the

keyboard.

2. Install the

power-button assembly.

3. Install the power-adapter port.

4. Follow the procedure from step 3 to step 24 in Installing the system board.

5. Install the right I/O-board.

6. Install the keyboard-controller board.

7. Install the

touchpad.

8. Install the speakers.

9. Install the display assembly.

10.Install the rear I/O-cover.

11. Install the

M.2 2230 solid-state drive. (if applicable)

12. Install the M.2 2280 solid-state drive. (if applicable)

13. Install the battery.

14. Install the base cover.

15.Follow the procedure in After working inside your computer.