Service Manual

Table 6. Advanced (continued)
Option Description
SATA Operation
Enables you to configure the operating mode of the integrated
SATA drive controller.
Choose one of the following options:
• Disabled: The SATA controllers are hidden
• AHCI: SATA is configured for AHCI mode
• RAID On: SATA is configured to support RAID mode
Default: RAID On
Adapter Warnings
Enables or disables the system setup (BIOS) warning messages
when you use certain power adapters.
• Enable Adapter Warnings
Default: Enabled
Function Key Behavior Enables you to set function key or multimedia key as the default
function key behavior.
Default: Function key
Battery Health Displays the battery health.
Intel Software Guard Extensions
Enables or disables Intel Software Guard Extensions.
Default: Software Controlled
Intel Software Guard Extensions allocated memory size
Displays the allocated memory size for Intel Software Guard
Extensions.
Camera
Thunderbolt
Enables or disables Thunderbolt technology support.
The options are:
• Enabled
• Disabled
Default: Disabled
Thunderbolt Boot Support
Enables or disables booting from storage devices connected to
Thunderbolt port.
Default: Disabled
Security
Table 7. Security
Option Description
Unlock Setup Status Displays if the setup status is unlocked.
Admin Password Status Displays if the administrator password is clear or set.
Default: Not set
System Password Status Displays if the system password is clear or set.
Default: Not set
Admin Password
Allows you to set, change, or delete the administrator(admin) password.
The entries to set password are:
70