Alienware m15 Ryzen edicija R5 Servisni priručnik Model sa regulacijom: P109F Tip sa regulacijom: P109F002/P109F003 April 2021. Pregl.
Napomene, mere opreza i upozorenja NAPOMENA: Oznaka NAPOMENA ukazuje na važne informacije koje vam pomažu da bolje koristite proizvod. OPREZ: Oznaka OPREZ ukazuje na potencijalno oštećenje hardvera ili gubitak podataka i objašnjava vam kako da izbegnete problem. UPOZORENJE: UPOZORENJE ukazuje na opasnost od oštećenja opreme, telesnih povreda ili smrti. © 2021 Dell Inc. ili podružnice. Sva prava zadržana. Dell, EMC, i drugi žigovi su žigovi Dell Inc. ili njegovih podružnica.
Sadržaj Poglavlje 1: Rad u unutrašnjosti računara................................................................................................6 Pre rada u unutrašnjosti računara.........................................................................................................................................6 Bezbednosna uputstva.........................................................................................................................................................
Tabla osetljiva na dodir.......................................................................................................................................................39 Uklanjanje table osetljive na dodir............................................................................................................................... 39 Postavljanje table osetljive na dodir.............................................................................................................................
Poglavlje 6: Dobijanje pomoći i kontaktiranje kompanije Alienware..................................................
Rad u unutrašnjosti računara Pre rada u unutrašnjosti računara Informacije o ovom zadatku NAPOMENA: Slike u ovom dokumentu se mogu razlikovati u odnosu na vaš računar u zavisnosti od poručene konfiguracije. Koraci 1. Sačuvajte i zatvorite sve otvorene datoteke i zatvorite sve otvorene aplikacije. 2. Isključite računar. Kliknite na Start > Napajanje > Isključivanje. NAPOMENA: Ako koristite neki drugi operativni sistem, pogledajte dokumentaciju svog operativnog sistema u vezi uputstva za zatvaranje. 3.
NAPOMENA: Boja vašeg računara i nekih komponenata može izgledati drugačije u odnosu na one prikazane u ovom dokumentu. Zaštita od elektrostatičkog pražnjenja Elektrostatično pražnjenje je najveći problem prilikom rukovanja elektronskim komponentama, naročito osetljivih komponenti, kao što su kartice za proširenje, DIMM memorije i sistemske ploče. Već i neznatna pražnjenja mogu da oštete električna kola tako da to možda i ne bude očigledno, kao što su povremeni problemi ili skraćeni životni vek.
● ● ● ● ● usled uobičajenog korišćenja i treba ih redovno proveravati pomoću pribora za testiranje narukvice da bi se izbeglo slučajno oštećenje hardvera usled elektrostratičkog pražnjenja. Preporučuje se da se testiranje narukvice i žice za spajanje vrši najmanje jednom sedmično. Pribor za testiranje ESD narukvice – Žice unutar ESD narukvice sklone su oštećenju tokom vremena.
Uklanjanje i postavljanje komponenti NAPOMENA: Slike u ovom dokumentu se mogu razlikovati u odnosu na vaš računar u zavisnosti od poručene konfiguracije. Preporučeni alati Za procedure u ovom dokumentu mogu se zahtevati sledeći alati: ● Phillips odvrtač broj 0 Lista zavrtanja NAPOMENA: Kad uklanjate zavrtnje sa komponente, preporučujemo vam da zabeležite tip zavrtnja, broj zavrtanja i da zavrtnje stavite u kutiju za čuvanje zavrtanja.
Tabela 1.
1. 2. 3. 4. 5. 6.
7. Rashladni element 8. U/I ploča 9. Baterija 10. Levi zvučnik 11. Sklop oslonca za dlan i tastature 12. Sklop ekrana 13. Tabla osetljiva na dodir 14. Nosač table osetljive na dodir 15. Ploča kontrolora tastature 16. Desni zvučnik 17. Zadnji U/I poklopac 18. USB ploča 19. Dugme za napajanje 20.Nosač dugmeta za napajanje 21. Desni ventilator 22.Memorijski moduli 23.Bežična kartica 24.Nosač bežične kartice 25.Matična ploča 26.
Koraci 1. Uklonite zavrtnje (M2,5x5) kojima je poklopac osnove pričvršćen za sklop oslonca za dlanove i tastature. 2. Olabavite dva neispadajuća zavrtnja (M2.5x8.5+3.5) kojima je poklopac osnove pričvršćen za sklop oslonca za dlan i tastature. 3. Olabavite četiri neispadajuća zavrtnja (M2.5x1.7+3.3) koji učvršćuju poklopac osnove za sklop oslonca za dlan i tastature.
5. Podignite levu i desnu stranu poklopca osnove. 6. Podignite poklopac osnove sa sklopa oslonca za dlan i tastature. NAPOMENA: Pratite sledeće korake koji važe samo ako želite da uklonite još neku komponentu sa računara. 7. Odspojite kabl baterije sa matične ploče. 8. Okrenite računar, pa pritisnite i držite dugme za napajanje 20 sekundi da biste oslobodili zaostalu energiju.
Koraci 1. Povežite kabl baterije na matičnu ploču. 2. Gurnite držače na vrhu poklopca osnove ispod zadnjeg U/I poklopca i gurnite poklopac osnove u ležište na sklopu oslonca za dlan i tastature. 3. Postavite dva zavrtnja (M2,5x5) kojima je poklopac pričvršćen za sklop oslonca za dlanove i tastature. 4. Zategnite dva neispadajuća zavrtnja (M2,5x8,5+3,5) kojima je poklopac osnove pričvršćen za sklop oslonca za dlan i tastature. 5.
● Ispraznite potpuno bateriju pre nego što je uklonite. Isključite AC adapter za napajanje iz sistema i koristite računar samo na bateriju - baterija je u potpunosti ispražnjena kada računar više ne može da se uključi pritiskom na dugme za uključivanje/isključivanje. ● Nemojte da pritiskate, ispuštate, oštećujete bateriju ili je probijate drugim objektima. ● Ne izlažite bateriju visokim temperaturama i ne rastavljajte sklopove i ćelije baterije. ● Ne pritiskajte površinu baterije.
3. Uklonite četiri zavrtnja (M2x3) koji učvršćuju bateriju za sklop oslonca za dlan i tastature. 4. Podignite bateriju sa sklopa oslonca za dlan i tastature. Postavljanje baterije Preduslovi Ako menjate komponentu, uklonite postojeću komponentu pre sprovođenja procedure za postavljanje. Informacije o ovom zadatku Na slici u nastavku je prikazana lokacija baterije i vizuelna reprezentacija procedure postavljanja baterije. Koraci 1.
Poluprovodnički disk Uklanjanje poluprovodničkog diska 2230 iz SSD slota jedan Preduslovi 1. Sledite proceduru u odeljku Pre rada u unutrašnjosti računara. OPREZ: Poluprovodnički diskovi su lomljivi. Budite pažljivi pri rukovanju poluprovodničkim diskom. OPREZ: Da biste izbegli gubitak podataka, nemojte uklanjati poluprovodnički disk kada je računar uključen ili u režimu spavanja. 2. Uklonite poklopac osnove.
Informacije o ovom zadatku NAPOMENA: Ova procedura je primenjiva samo na računare koji se isporučuju sa poluprovodničkim diskom 2230 postavljenim u SSD slotu jedan. NAPOMENA: U zavisnosti od poručene konfiguracije, vaš računar može da podržava poluprovodnički disk 2230 ili poluprovodnički disk 2280 u SSD slotu jedan. Ako hoćete da zamenite 2230 poluprovodnički disk 2280 poluprovodničkim diskom, pogledajte proceduru pomeranja nosača zavrtnja.
Informacije o ovom zadatku NAPOMENA: Ova procedura je primenjiva samo na računare koji se isporučuju sa poluprovodničkim diskom 2280 postavljenim u SSD slotu jedan. Na slici u nastavku prikazana je lokacija poluprovodničkog diska 2280 koji je postavljen u SSD slotu jedan, kao i vizuelna reprezentacija procedure uklanjanja. Koraci 1. Uklonite dva zavrtnja (M2x4) kojima je termalni štitnik pričvršćen za poluprovodnički disk i matičnu ploču. 2. Skinite termalni štitnik sa poluprovodničkog diska. 3.
Koraci 1. Poravnajte zarez na poluprovodničkom disku sa držačem na priključku za poluprovodnički disk. 2. Gurnite poluprovodnički disk u njegov slot. 3. Postavite termalni štitnik na poluprovodnički disk. 4. Poravnajte otvore za zavrtnje na termalnom štitniku sa otvorima za zavrtnje na poluprovodničkom disku i matičnoj ploči. 5. Postavite dva zavrtnja (M2x4) koji pričvršćuju termalni štitnik za poluprovodnički disk i matičnu ploču. Sledeći koraci 1. Postavite poklopac osnove. 2.
Koraci 1. Uklonite dva zavrtnja (M2x4) kojima je termalni štitnik pričvršćen za matičnu ploču i sklop oslonca za dlan i tastature. 2. Skinite termalni štitnik sa poluprovodničkog diska. 3. Gurnite i podignite poluprovodnički disk iz slota za poluprovodnički disk na matičnoj ploči. Postavljanje poluprovodničkog diska 2230 u SSD slot dva Preduslovi Ako menjate komponentu, uklonite postojeću komponentu pre sprovođenja procedure za postavljanje.
Koraci 1. Poravnajte zarez na poluprovodničkom disku sa držačem na priključku za poluprovodnički disk. 2. Gurnite poluprovodnički disk u njegov slot. 3. Postavite nosač poluprovodničkog diska na poluprovodnički disk. 4. Poravnajte otvore za zavrtnje na termalnom štitniku sa otvorima za zavrtnje na poluprovodničkom disku i matičnoj ploči. 5. Postavite dva zavrtnja (M2x4) kojim je poluprovodnički disk pričvršćen za matičnu ploču. Sledeći koraci 1. Postavite poklopac osnove. 2.
Koraci 1. Uklonite dva zavrtnja (M2x4) kojima je termalni štitnik pričvršćen za matičnu ploču i sklop oslonca za dlan i tastature. 2. Skinite termalni štitnik sa poluprovodničkog diska. 3. Gurnite i podignite poluprovodnički disk iz slota za poluprovodnički disk na matičnoj ploči. Postavljanje poluprovodničkog diska 2280 u SSD slot dva Preduslovi Ako menjate komponentu, uklonite postojeću komponentu pre sprovođenja procedure za postavljanje.
Koraci 1. Poravnajte zarez na poluprovodničkom disku sa držačem na priključku za poluprovodnički disk. 2. Gurnite poluprovodnički disk u njegov slot. 3. Postavite nosač poluprovodničkog diska na poluprovodnički disk. 4. Poravnajte otvore za zavrtnje na termalnom štitniku sa otvorima za zavrtnje na poluprovodničkom disku i matičnoj ploči. 5. Postavite dva zavrtnja (M2x4) kojim je poluprovodnički disk pričvršćen za matičnu ploču. Sledeći koraci 1. Postavite poklopac osnove. 2.
3. Da biste postavili 2230 poluprovodnički disk u SSD slot jedan, pogledjate postavljanje 2230 poluprovodničkog diska u SSD slot jedan. 4. Da biste postavili 2280 poluprovodnički disk u SSD slot jedan, pogledjate postavljanje 2280 poluprovodničkog diska u SSD slot jedan. Procedura za pomeranje držača tastature u SSD slotu dva Informacije o ovom zadatku Računar podržava dva faktora oblika slota poluprovodničkog diska dva. ● M.2 2230 ● M.
3. Da biste postavili 2230 poluprovodnički disk u SSD slot dva, pogledajte postavljanje 2230 poluprovodničkog diska u SSD slot dva. 4. Da biste postavili 2280 poluprovodnički disk u SSD slot dva, pogledajte postavljanje 2280 poluprovodničkog diska u SSD slot dva. Zvučnici Uklanjanje zvučnika Preduslovi 1. 2. 3. 4. Sledite proceduru u odeljku Pre rada u unutrašnjosti računara. Uklonite poklopac osnove. Uklonite bateriju. Uklanjanje poluprovodničkog diska 2280 iz SSD slota dva.
Koraci 1. Odspojite kabl zvučnika sa matične ploče. 2. Odlepite trake kojima je kabl zvučnika pričvršćen za sklop oslonca za dlan i tastature. 3. Zabeležite putanju kabla zvučnika i izvadite kabl zvučnika iz vođica za usmeravanje na sklopu oslonca za dlanove i tastature. 4. Podignite zvučnike zajedno sa kablovima sa sklopa oslonca za dlan i tastature. Montiranje zvučnika Preduslovi Ako menjate komponentu, uklonite postojeću komponentu pre sprovođenja procedure za postavljanje.
U/I ploča Uklanjanje U/I ploče Preduslovi 1. Sledite proceduru u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite poklopac osnove. Informacije o ovom zadatku Na slici u nastavku je prikazana lokacija U/I ploče i vizuelna reprezentacija procedure uklanjanja U/I ploče. Koraci 1. Podignite Mylar matične ploče i otvorite rezu da biste otkačili kabl U/I ploče sa U/I ploče. 2. Uklonite zavrtanj (M2x4) kojim je U/I ploča pričvršćena za sklop oslonca za dlan i tastature. 3.
Koraci 1. Skinite majlar matične ploče. 2. Poravnajte i postavite U/I ploču na sklop oslonca za dlan i tastature. 3. Postavite zavrtanj (M2x4) kojim je U/I ploča pričvršćena za sklop oslonca za dlan i tastature. 4. Zategnite zavrtanj (M2x2) kojim je U/I ploča pričvršćena za sklop oslonca za dlan i tastature. 5. Povežite kabl U/I ploče sa U/I pločom i zatvorite rezu da biste fiksirali kabl. 6. Postavite majlar matične ploče na matičnu ploču. Sledeći koraci 1. Postavite poklopac osnove. 2.
Koraci 1. Podignite Mylar traku matične ploče da biste pristupili memorijskom modulu. 2. Vrhovima prstiju pažljivo razdvojite spojnice za pričvršćivanje sa obe strane priključka memorijskog modula tako da memorijski modul iskoči. 3. Uklonite memorijski modul iz priključka memorijskog modula. NAPOMENA: Ponovite korake 1 i 3 da biste uklonili druge memorijske module iz računara, ako su postavljeni.
Koraci 1. Podignite Mylar traku matične ploče da biste pristupili priključku memorijskog modula. 2. Poravnajte zarez na memorijskom modulu sa držačem na priključku memorijskog modula. 3. Pod uglom jako gurnite memorijski modul u slot. 4. Pritisnite memorijski modul na dole tako da klikne u ležištu. NAPOMENA: Ako ne čujete klik, uklonite memorijski modul i ponovo ga instalirajte. NAPOMENA: Ponovite korake od 1 do 3 da biste postavili druge memorijske module u računar, ako je dostupno. Sledeći koraci 1.
Bežična kartica Uklanjanje bežične kartice Preduslovi 1. Sledite proceduru u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite poklopac osnove. Informacije o ovom zadatku Na slici u nastavku prikazana je lokacija bežične kartice, kao i vizuelna reprezentacija procedure njenog uklanjanja. Koraci 1. Podignite Mylar traku matične ploče da biste pristupili bežičnoj kartici. 2. Uklonite zavrtanj (M2x4) kojim je nosač bežične kartice pričvršćen za matičnu ploču i sklop oslonca za dlan i tastature.
3. Podignite nosač bežične kartice sa bežične kartice. 4. Odvojite kablove antene sa bežične kartice. 5. Gurnite i podignite bežičnu karticu iz slota za bežičnu karticu. Postavljanje bežične kartice Preduslovi Ako menjate komponentu, uklonite postojeću komponentu pre sprovođenja procedure za postavljanje. Informacije o ovom zadatku Na slici u nastavku prikazana je lokacija bežične kartice, kao i vizuelna reprezentacija procedure postavljanja. Koraci 1.
U sledećoj tabeli je navedena šema boja kablova antene za bežičnu karticu koju podržava računar. Tabela 2. Šema boja kabla antene Konektori na bežičnoj kartici Boja kabla antene Oznaka svilenog ekrana Glavno Bela GLAVNO △ (beli trougao) Pomoćno Crna AUX ▲ (crni trougao) 3. Poravnajte zarez na bežičnoj kartici sa držačem na slotu za bežičnu karticu i ubacite bežičnu karticu u slot za bežičnu karticu pod uglom. 4. Poravnajte i postavite nosač bežične kartice na bežičnu karticu. 5.
Koraci 1. Uklonite dva zavrtnja (M2x4) kojima je zadnji U/I poklopac pričvršćen za sklop oslonca za dlanove i tastature. 2. Uklonite dva zavrtnja (M2.5x5) kojima je zadnji U/I poklopac pričvršćen za sklop oslonca za dlanove i tastature. 3. Isključite tron laki kabl iz matične ploče. 4. Čvrsto uhvatite strane računara sa obe ruke i gurnite gumene nožice na zadnjem U/I poklopcu prema spolja palčevima da biste oslobodili zadnji U/I poklopac sa sklopa oslonca za dlan i tastature. 5.
Koraci 1. Gurnite zadnji U/I poklopac u sklop oslonca za dlan i tastature dok ne klikne u mesto. 2. Zamenite dva zavrtnja (M2x4) kojima je zadnji poklopac pričvršćen za sklop oslonca za dlanove i tastature. 3. Povežite Tron laki kabl sa matičnom pločom. 4. Zamenite dva zavrtnja (M2.5x5) kojima je zadnji poklopac pričvršćen za sklop oslonca za dlanove i tastature. Sledeći koraci 1. Postavite poklopac osnove. 2. Sledite proceduru u odeljku Posle rada u unutrašnjosti računara.
Informacije o ovom zadatku Na slici u nastavku prikazana je lokacija table osetljive na dodir, kao i vizuelna reprezentacija procedure njenog uklanjanja. Koraci 1. Izvucite kabl zvučnika iz vođica za usmeravanje na sklopu oslonca za dlan i tastature. 2. Otvorite rezu i izvucite kabl table osetljive na dodir iz konektora na matičnoj ploči. 3. Otvorite rezu i izvadite kabl table osetljive na dodir iz table osetljive na dodir. 4. Uklonite dva zavrtnja (M2.5x2.
Postavljanje table osetljive na dodir Preduslovi Ako menjate komponentu, uklonite postojeću komponentu pre sprovođenja procedure za postavljanje. Informacije o ovom zadatku Na slici u nastavku prikazana je lokacija table osetljive na dodir, kao i vizuelna reprezentacija procedure njenog postavljanja. Koraci 1. Poravnajte i postavite tablu osetljivu na dodir u slot na sklopu oslonca za dlan i tastature. 2.
Sledeći koraci 1. Postavite bateriju. 2. Postavite poklopac osnove. 3. Sledite proceduru u odeljku Posle rada u unutrašnjosti računara. Port adaptera za napajanje Uklanjanje porta adaptera za napajanje Preduslovi 1. Sledite proceduru u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite poklopac osnove. 3. Uklonite zadnji U/I poklopac. Informacije o ovom zadatku Na slici u nastavku prikazana je lokacija porta adaptera za napajanje, kao i vizuelna reprezentacija procedure njegovog uklanjanja. Koraci 1.
3. Odvojite kabl ekrana od matične ploče i uklonite ga iz slota na njoj. 4. Podignite deo majlara sa matične ploče pored levog ventilatora za hlađenje. 5. Uklonite dva zavrtnja (M2x4) na nosaču porta adaptera za napajanje koji učvršćuju port adaptera za napajanje za matičnu ploču. 6. Podignite nosač porta adaptera za napajanje sa matične ploče. 7. Odvojite kabl porta adaptera za napajanje sa matične ploče. 8. Odlepite i podignite port adaptera za napajanje zajedno sa kablom sa matične ploče.
6. Zamenite majlar matične ploče nazad na ivicu levog ventilatora za hlađenje. 7. Provucite kabl ekrana kroz otvor između porta adaptera za napajanje i sklopa rashladnog elementa. 8. Povežite kabl ekrana na matičnoj ploči i zatvorite rezu da biste fiksirali kabl. 9. Povežite Alienhead LED kabl na matičnu ploču. 10. Povežite kabl ekrana na matičnu ploču. Sledeći koraci 1. Postavite zadnji U/I poklopac. 2. Postavite poklopac osnove. 3. Sledite proceduru u odeljku Posle rada u unutrašnjosti računara.
Koraci 1. Otvorite rezu i izvadite kabl ekrana iz konektora na matičnoj ploči. 2. Isključite kabl Alienhead LED kartice sa matične ploče. 3. Odspojite kabl RGB-IC kamere sa USB ploče. NAPOMENA: Ovaj korak važi za uređaje koji se isporučuju uz hibridni RGB-IC modul kamere. 4. Podignite majlar matične ploče i odlepite trake koje pričvršćuju kabl RGB-IC kamere za matičnu ploču. NAPOMENA: Ovaj korak važi za uređaje koji se isporučuju uz hibridni RGB-IC modul kamere. 5.
10. Podignite sklop ekrana sa sklopa oslonca za dlanove i tastature. 11. Nakon obavljanja svih navedenih koraka, ostaje vam sklop ekrana. Postavljanje sklopa ekrana Preduslovi Ako menjate komponentu, uklonite postojeću komponentu pre sprovođenja procedure za postavljanje. Informacije o ovom zadatku Na slici u nastavku je prikazana lokacija sklopa ekrana i vizuelna reprezentacija procedure postavljanja.
Koraci 1. Poravnajte otvore za zavrtnje na zglobovima ekrana sa otvorima za zavrtnje na sklopu oslonca za dlan i tastature i postavite sklop ekrana na sklop oslonca za dlan i tastature. 2. Provucite kabl ekrana kroz vođice za usmeravanje na sklopu oslonca za dlan i tastature. 3. Provucite kablove RGB-IC kamere kroz vođice za usmeravanje na sklopu oslonca za dlan i tastature. NAPOMENA: Ovaj korak važi za uređaje koji se isporučuju uz hibridni RGB-IC modul kamere. 4.
Kabl ploče kontrolera tastature Uklanjanje ploče tastature kontrolora Preduslovi 1. Sledite proceduru u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite poklopac osnove. 3. Uklonite bateriju. Informacije o ovom zadatku Na slici u nastavku je prikazana lokacija ploče tastature kontrolora, kao i vizuelna reprezentacija procedure njenog uklanjanja. Koraci 1. Otvorite rezu i izvucite kabl pozadinskog osvetljenja tastature iz ploče tastature kontrolora. 2.
Koraci 1. Pomoću stubića za poravnanje postavite ploču tastature kontrolora na slot na sklopu oslonca za dlanove i tastature. 2. Poravnajte otvor za zavrtnje na ploči tastature kontrolora sa otvorom za zavrtnje na sklopu oslonca za dlan i tastature. 3. Postavite zavrtanj (M2x2) kojim je ploča tastature kontrolora pričvršćena za sklop oslonca za dlan i tastature. 4. Povežite kabl ploče kontrolera tastature sa njom i zatvorite rezu da biste fiksirali kabl. 5.
8. Uklonite zadnji U/I poklopac. 9. Uklonite majlar matične ploče. Informacije o ovom zadatku Sledeća slika prikazuje konektore na matičnoj ploči. NAPOMENA: Ovo je slika matične ploče sistema koja podržava Intel procesore. Kablovi se nalaze i na matičnoj ploči koja podržava AMD procesore. 1. 2. 3. 4. 5. 6. 7. 8.
Koraci 1. Uklonite dva zavrtnja (M2x4) koji učvršćuju nosač USB porta tipa C za matičnu ploču. 2. Uklonite nosač USB porta tipa C sa matične ploče. 3. Otvorite rezu i izvucite kabl ekrana iz matične ploče. 4. Isključite kabl Alienhead LED kartice sa matične ploče. 5. Odspojite kabl ekrana sa matične ploče. 6. Odvojite kabl porta adaptera za napajanje sa matične ploče. 7. Odvojite kabl porta adaptera za napajanje sa matične ploče. 8. Izvucite kabl U/I ploče iz matične ploče. 9.
17. Stavite sklop matične ploče na čistu i ravnu površinu. 18. Preokrenite sklop matične ploče. 19. Uklonite USB ploču. 20.Uklonite sklop rashladnog elementa. 21. Nakon obavljanja svih navedenih koraka, ostaje vam matična ploča. Postavljanje matične ploče Preduslovi Ako menjate komponentu, uklonite postojeću komponentu pre sprovođenja procedure za postavljanje. NAPOMENA: Zamenom matične ploče poništavaju se bilo koje promene koje ste izvršili u BIOS-u korišćenjem programa za podešavanje BIOS-a.
Informacije o ovom zadatku Sledeća slika prikazuje konektore na matičnoj ploči. 1. 2. 3. 4. 5. 6. 7. 8. 9. Kabl ekrana Kabl Alienhead LED Kabl zvučnika kabl U/I ploče Kabl porta adaptera za napajanje Kabl table osetljive na dodir Kabl tastature Kabl RGB-IC kamere Kabl dugmeta za napajanje Na slici u nastavku prikazana je lokacija matične ploče, kao i vizuelna reprezentacija procedure postavljanja.
Koraci 1. NAPOMENA: Postavite matičnu ploču na čistu i ravnu površinu. Zamenite USB ploču. 2. Postavite sklop rashladnog elementa. 3. Preokrenite sklop matične ploče. 4. Poravnajte otvore za zavrtnje na sklopu matične ploče sa otvorima za zavrtnje na sklopu oslonca za dlan i tastature. 5. Provucite kabl ploče napajanja ispod USB ploče. 6. Postavite sedam zavrtnja (M2x4) kojima je matična ploča pričvršćena za sklop oslonca za dlan i tastature. 7.
11. Povežite kabl ekrana na matičnu ploču. 12. Zalepite kabl porta adaptera za napajanje u priključak i povežite ga za kabl porta adaptera za napajanje na matičnoj ploči. 13. Povežite kabl U/I ploče sa matičnom pločom. 14. Povežite kabl zvučnika na matičnu ploču. 15. Povežite kabl table osetljive na dodir sa matičnom pločom i zatvorite rezu da biste fiksirali kabl. 16. Povežite kabl ploče kontrolera tastature sa matičnom pločom i zatvorite rezu da biste fiksirali kabl. 17.
Koraci 1. Isključite kabl levog i desnog ventilatora iz matične ploče. 2. Preokrenite sklop matične ploče. 3. Uklonite šest zavrtnja (M2x4) koji učvršćuju sklop rashladnog elementa za matičnu ploču. 4. Podignite rashladni element sa matične ploče. Postavljanje sklopa rashladnog elementa Preduslovi Ako menjate komponentu, uklonite postojeću komponentu pre sprovođenja procedure za postavljanje.
Koraci 1. Postavite sklop rashladnog elementa na matičnu ploču. 2. Poravnajte otvore za zavrtnje na sklopu rashladnog elementa sa otvorima za zavrtnje na matičnoj ploči. 3. Postavite šest zavrtnja (M2x4) koji učvršćuju sklop rashladnog elementa za matičnu ploču. 4. Okrenite matičnu ploču i povežite kablove levog i desnog ventilatora. Sledeći koraci 1. Sledite proceduru od koraka 4 do koraka 20 u delu Postavljanje matične ploče. 2. Postavite zadnji U/I poklopac. 3. Postavite bateriju. 4.
USB ploča Uklanjanje USB ploče Preduslovi 1. Sledite proceduru u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite poklopac osnove. 3. Uklonite 2230 poluprovodnički disk ili 2280 poluprovodnički disk u slotu jedan u zavisnosti od toga šta je primenjivo. 4. Uklonite 2230 poluprovodnički disk ili 2280 poluprovodnički disk u slotu dva u zavisnosti od toga šta je primenjivo. 5. Uklonite U/I ploču. 6. Uklonite memorijski modul. 7. Uklonite bežičnu karticu. 8. Uklonite bateriju. 9.
Informacije o ovom zadatku Na slici u nastavku je prikazana lokacija USB ploče i vizuelna reprezentacija procedure postavljanja. Koraci 1. Poravnajte otvore za zavrtnje na USB ploči sa otvorima za zavrtnje na matičnoj ploči. 2. Postavite dva zavrtnja (M2x4) koja učvršćuju USB ploču za matičnu ploču. Sledeći koraci 1. Sledite proceduru od koraka 4 do koraka 20 u delu Postavljanje matične ploče. 2. Postavite zadnji U/I poklopac. 3. Postavite bateriju. 4. Postavite bežičnu karticu. 5.
7. Uklonite bežičnu karticu. 8. Uklonite sklop ekrana. 9. Uklonite bateriju. 10. Uklonite zadnji U/I poklopac. 11. Sledite proceduru od koraka 1 do koraka 16 u delu Uklanjanje matične ploče. NAPOMENA: Matična ploča može da se ukloni zajedno sa sklopom rashladnog elementa i USB pločom. Informacije o ovom zadatku Na slikama u nastavku prikazana je lokacija dugmeta za napajanje i vizuelna reprezentacija procedure uklanjanja. Koraci 1.
Koraci 1. Postavite dugme za napajanje u slot na sklopu oslonca za dlan i tastature. 2. Poravnajte otvore za zavrtnje na nosaču dugmeta za napajanje sa otvorima za zavrtnje na sklopu oslonca za dlanove i tastature. 3. Postavite tri zavrtnja (M2x2) koji učvršćuju nosač dugmeta za napajanje za sklop oslonca za dlan i tastature. Sledeći koraci 1. Sledite proceduru od koraka 4 do koraka 20 u delu Postavljanje matične ploče. 2. Postavite zadnji U/I poklopac. 3. Postavite bateriju. 4. Postavite sklop ekrana. 5.
8. Uklonite sklop ekrana. 9. Uklonite bateriju. 10. Uklonite zadnji U/I poklopac. 11. Sledite proceduru od koraka 1 do koraka 16 u delu Uklanjanje matične ploče. NAPOMENA: Matična ploča može da se ukloni zajedno sa rashladnim elementom i USB pločom. 12. Uklonite dugme za napajanje. Informacije o ovom zadatku Nakon obavljanja koraka u pripremnim uslovima ostaje nam sklop oslonca za dlan i tastature.
Sledeći koraci 1. Postavite dugme za napajanje. 2. Sledite proceduru od koraka 4 do koraka 20 u delu Postavljanje matične ploče. 3. Postavite zadnji U/I poklopac. 4. Postavite bateriju. 5. Postavite sklop ekrana. 6. Postavite bežičnu karticu. 7. Postavite memorijski modul. 8. Postavite U/I ploču. 9. Postavite poluprovodnički disk 2230 ili poluprovodnički disk 2280 u SSD slot jedan u zavisnosti od toga šta je primenjivo. 10.
Upravljački programi i preuzimanja Ako rešavate probleme, preuzimate ili instalirate upravljačke programe, preporučuje se da pročitate članak Dell baze znanja, Drivers and Downloads FAQ (Česta pitanja o upravljačkim programima i preuzimanjima) SLN128938.
Podešavanje sistema OPREZ: Ako niste iskusni korisnik računara, ne menjajte postavke u BIOS programu za podešavanje. Neke promene mogu uzrokovati nepravilan rad računara. NAPOMENA: Pre nego što unesete izmene u BIOS program za podešavanje, preporučuje se da zabeležite informacije sa ekrana BIOS programa za podešavanje radi naknadne upotrebe.
● Pristupite programu System Setup pritiskom na taster F2 ● Pozovete meni za jedno pokretanje sistema pritiskom na taster F12 Meni za jednokratno pokretanje sistema prikazuje uređaje sa kojih možete da izvršite podizanje sistema, uključujući opciju dijagnostike. Opcije menija za pokretanje sistema su: ● Removable Drive (ako je dostupno) ● STXXXX disk (ako je dostupno) NAPOMENA: XXX označava broj SATA disk jedinice.
Tabela 4. Opcije podešavanja sistema – Napredni meni Napred USB Emulation (USB emulacija) Omogućava ili onemogućava funkciju USB emulacije. Ova funkcija definiše kako BIOS, u odsustvu operativnog sistema koji podržava USB, upravlja USB uređajima. USB emulacija je uvijek uključena u toku POST režima. NAPOMENA: Kad je ova opcija isključena, ne možete da pokrenete nijedan tip USB uređaja (disketu, čvrsti disk ili memorijski ključ).
Tabela 4. Opcije podešavanja sistema – Napredni meni Napred BIOS Recovery from Hard Drive Omogućava korisniku da sistem vrati iz određenih oštećenih stanja BIOS-a iz datoteke za oporavak na primarnom čvrstom disku korisnika ili spoljašnjoj USB memoriji. BIOS Auto-Recovery (Automatski oporavak BIOS-a) Omogućava da BIOS automatski oporavi BIOS bez radnji korisnika.
Tabela 5. Opcija podešavanja sistema - Meni Bezbednost Bezbednost komande brisanja. Promene ove opcije odmah stupaju na snagu. Podrazumevano: Onemogućeno UEFI Firmware Capsule Updates Omogućava ili onemogućava ažuriranja BIOS-a preko paketa za ažuriranje UEFI kapsule. Podrazumevano: Omogućeno Secure Boot (Bezbedno pokretanje) Omogućava ili onemogućava konfiguraciju funkcija platforme na Dell klijentskim sistemima pomoću BIOS-a koji podržava WSMT. Podrazumevano: Omogućeno Tabela 6.
OPREZ: Svako može pristupiti podacima ukladištenim na računaru ako računar nije zaključan ili pod nadzorom. NAPOMENA: Funkcija lozinka sistema i lozinka za podešavanje je onemogućena. Dodeljivanje lozinke za podešavanje sistema Preduslovi Novu lozinku sistema ili lozinku administratora možete da dodelite samo kada je status Not Set (Nije postavljena).
Računar se restartuje. Brisanje CMOS podešavanja Informacije o ovom zadatku OPREZ: Brisanje CMOS podešavanja resetuje podešavanja BIOS-a na računaru. Koraci 1. Uklonite poklopac osnove. 2. Odspojite kabl baterije sa matične ploče. 3. Pritisnite i zadržite dugme za napajanje 20 sekundi. 4. Sačekajte jedan minut. 5. Povežite kabl baterije na matičnu ploču. 6. Postavite poklopac osnove.
Rešavanje problema Svetla za dijagnostiku sistema Svetlo za status napajanja i baterije Svetlo za status napajanja i baterije pokazuje status napajanja i baterije računara. Ovo su stanja napajanja: Neprekidno belo: Adapter za napajanje je povezan i baterija je napunjena više od 5%. Žuto svetlo: Računar radi na baterijsko napajanje i kapacitet baterije je manji od 5%. Isključeno: ● Adapter za napajanje je povezan i baterija je potpuno napunjena.
5. Restartujte računar i pritisnite taster F12 kad vidite Dell logotip na ekranu. 6. Pokrenite USB disk u meniju za jednokratno pokretanje. 7. Unesite naziv programske datoteke za podešavanje BIOS-a i pritisnite taster Enter. 8. Videćete Uslužni program za ažuriranje BIOS-a. Pratite uputstva na ekranu da biste završili ažuriranje BIOS-a. Flešovanje BIOS-a Informacije o ovom zadatku Možda ćete morati da flešujete (ažurirate) BIOS kada bude dostupna njegova ispravka ili kada menjate matičnu ploču.
Oslobodite zaostalu energiju (obavite hardverski reset) Informacije o ovom zadatku Zaostala energija predstavlja zaostali statički elektricitet koji ostaje u računaru čak i kad se on isključi i baterija ukloni. Iz bezbednosnih razloga i da biste zaštitili osetljive elektronske komponente u računaru morate da oslobodite zaostalu energiju pre nego što započnete uklanjanje ili zamenu bilo kojih komponenti u računaru.
Dobijanje pomoći i kontaktiranje kompanije Alienware Resursi za samostalnu pomoć Informacije o proizvodima i uslugama kompanije Alienware, kao i pomoć u vezi s njima, možete dobiti koristeći sledeće resurse za samopomoć: Tabela 10. Alienware proizvodi i resursi za onlajn samopomoć Resursi za samostalnu pomoć Lokacija resursa Informacije o proizvodima i uslugama kompanije Alienware www.alienware.