Service Manual

Advanced
Default: Software Controlled
Intel(R) Software Guard Extensions allocated memory
size
Displays the allocated memory size for Intel Software Guard
Extensions.
BIOS Recovery from Hard Drive Enable the user to recover from certain corrupted BIOS
conditions from a recovery le on the user primary hard
drive
Default: Enabled
BIOS Auto-Recovery Enable or disable BIOS Auto-Recovery.
Default: Disabled
SupportAssist System Resolution
Auto OS Recovery Threshold Control the automatic boot ow for SupportAssist System
Resolution Console and for Dell OS Recovery tool.
Default: 2
SupportAssist OS Recovery Enable or disable SupportAssist OS recovery.
Default: Enabled
Intel(R) Rapid Storage Technology
Non-RAID Physical Disks Displays the disk using the Intel(R) Rapid Storage
Technology.
Table 5. System setup options—Security menu
Security
Unlock Setup Status Displays if the setup status is unlocked.
Admin Password Status Displays if the administrator password is clear or set.
Default: Not set
System Password Status Displays if the system password is clear or set.
Default: Not set
HDD Password Status Displays if the HDD password is clear or set.
Default: Not set
Admin Password Enables you to set the administrator password. The
administrator password controls access to the system setup
utility.
System Password Enables you to set the system password. The system
password controls access to the computer at boot.
HDD password Enables you to set, change or delete the hard-disk drive
password.
Password Change Enables you to permit or deny system password or HDD
password changes.
Default: Permitted
Computrace Enable or disable the BIOS module interface of the
optional Computrace Service from Absolute Software.
Default: Activate
Firmware TPM Enables you to enable or disable the rmware TPM
function.
Default: Enabled
PPI Bypass for Clear Command Enables you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip
99