Service Manual

System board

Removing the system board

Prerequisites

1. Follow the procedure in

Before working inside your computer.

2. Remove the base cover.

3. Remove the 2230 solid-state drive in M.2 slot one, if installed.

4. Remove the

2280 solid-state drive in M.2 slot one, if installed.

5. Remove the 2230 solid-state drive in M.2 slot two, if installed.

6. Remove the 2280 solid-state drive in M.2 slot two, if installed.

7. Remove the

rear I/O-cover.

8. Remove the battery.

About this task

The following image indicates the location of the system board and provides a visual representation of the removal procedure.