Service Manual
Table Of Contents
- Alienware m17 R4 Service Manual
- Working inside your computer
- Removing and installing components
- Recommended tools
- Screw list
- Major components of Alienware m17 R4
- Base cover
- Solid state drive—M.2 slot one
- Solid state drive—M.2 slot two
- Solid state drive—M.2 slot three
- Battery
- Speakers
- Keyboard-controller board
- Touchpad
- Rear-I/O cover
- Display assembly
- Right I/O-board
- System board
- Left I/O-board
- Fan and heat-sink assembly
- Power-adapter port
- Power-button assembly
- Keyboard
- Palmrest
- Drivers and downloads
- System setup
- Troubleshooting
- Getting help and contacting Alienware
2. Install the power-button assembly.
3. Install the power-adapter port.
4. Install the touchpad.
5. Follow step 3 to step 22 in installing the system board.
6. Install the
right I/O-board.
7. Install the keyboard-controller board.
8. Install the display assembly.
9. Install the
battery.
10.Install the rear I/O-cover.
11. Install the speakers.
12. Install the 2280 solid-state drive in M.2 slot two, if installed.
13. Install the 2230 solid-state drive in M.2 slot two, if installed.
14. Install the 2280 solid-state drive in M.2 slot one, if installed.
15.Install the 2230 solid-state drive in M.2 slot one, if installed.
16.Install the base cover.
17. Follow the procedure in
After working inside your computer.
71