Service Manual

Advanced

Wake Up by Integrated LAN Allows the computer to be powered on by

special LAN signals.

NOTE: This option is available only

when Deep Sleep Control is disabled.

USB Wake Support Allows you to enable or disable the USB

Wake Support.

NOTE: This option is available only

when Deep Sleep Control is disabled.

Boot

Boot Configuration

Bootup Numlock State Allows you to set the status of the

Num Lock key during boot to On or

Off.

Wait For ‘F1’ If Error Allows you to enable or disable

system to boot if F1 error occurs.

Secure Boot Control Allows you to enable or disable the

secure boot control.

Load Legacy OPROM Allows you to enable or disable the

Legacy Option ROM.

Set Boot Priority

Boot List Option Displays the available boot devices.

USB Boot Support Allows you to enable or disable

booting from USB mass storage

devices such as external hard drive,

optical drive, USB drive, and so on.

1st Boot Displays the first boot device.

Default: Hard disk.

2nd Boot Displays the second boot device.

Default: USB hard disk.

3rd Boot Displays the third boot device.

Default: Internal ODD Devices.

4th Boot Displays the fourth boot device.

Default: USB Floppy Device.