User's Manual

© 1998 Oasis Imaging Products, Inc. Page 3 of 9
6. Remove the two screws that hold the
opposite end cap in place (Fig. 6).
Remanufacturing Instructions
Dell 1100 / Samsung ML 1610
Technical Support
Fig. 6
Fig. 7
Fig. 8
7. Use a small flat screw driver to pry up the
end cap to remove it (Fig. 7).
Set the toner hopper to the side.
8. Remove the two screws that secure the
wiper blade to the waste bin (Fig. 8).
Memphis, TN [phone]
Nashua, NH [phone]