Network Card User's Manual

8
The module provides the following power interfaces:
 48V DC 802.3af or 802.3at or PoE + interoperable Power-over-Ethernet (PoE) with intelli-source
PSE sourcing intelligence
 12V DC for external AC supplied power (adapter sold separately)
2.1.1.3 Indicator LEDs
There are 5 bicolor (power, ENET and WLAN) LEDs which operate as follows:
Table 1- AP-134 Indicator LEDs
Label
Function
Action
Status
PWR
AP power / ready status
Off
No power to AP
Red
Initial power-up condition
Flashing – Green
Device booting, not ready
On – Green
Device ready
ENET0
ENET1
Ethernet Network Link
Status / Activity
Off
Ethernet link unavailable
On – Amber
10/100Mbs Ethernet link
negotiated
On – Green
1000Mbps Ethernet link
negotiated
Flashing
Ethernet link activity
11b/g/n
2.4GHz Radio Status
Off
2.4GHz radio disabled
On – Amber
2.4GHz radio enabled in non-HT
WLAN mode
On – Green
2.4GHz radio enabled in HT
WLAN mode
Flashing – Green
2.4GHz Air monitor
11a/n
5GHz Radio Status
Off
5GHz radio disabled
On – Amber
5GHz radio enabled in non-HT
WLAN mode
On – Green
5GHz radio enabled in HT WLAN
mode
Flashing – Green
5GHz Air monitor