Owners manual

Replacing the 2.5-inch hard
drives
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Place the hard drive into the hard-drive carrier and align the tabs on the
carrier with the slots on the hard drive.
2 Snap the hard-drive carrier into the hard drive.
3 Slide the hard-drive assembly into the hard-drive cage until it snaps into
place.
4 Connect the data cable and power cable to the hard drive.
Post-requisites
Replace the left-side cover.
52