Installation manual

PowerConnect B-DXC-4S Rack Mount Kit Installation Procedure 7
53-1001799-01
FIGURE 2 DCX-4S rails installed in equipment cabinet
Install DCX-4S in cabinet
1. Ensure that the door is removed from the port side of the DCX-4S. For instructions, refer to the DCX-4S
Backbone Hardware Reference Manual.
2. Ensure the chassis can be oriented so that the nonport side has access to intake air (cool).
3. Use a lift to raise the chassis to the correct level.
CAUTION
Use safe lifting practices when moving the product. (C015)
4. If applicable, lock the wheels of the lift.
5. Gently slide the chassis onto the rack, ensuring that it remains supported during the transfer. Refer to Figure 3
on page 8.