Installation manual

8 PowerConnect B-DCX-4S Mid-Mount Rack Kit Installation Procedure
53-1001798-01
FIGURE 4 Telco mid-mount brackets installed on DCX-4S chassis
Install DCX-4S in cabinet
1. Ensure that the door is removed from the port side of the DCX-4S. For instructions, refer to the DCX-4S
Backbone Hardware Reference Manual.
2. Ensure the chassis can be oriented so that the nonport side has access to intake air (cool).
3. Use a lift to raise the chassis to the correct level.
CAUTION
Use safe lifting practices when moving the product. (C015)
4. If applicable, lock the wheels of the lift.
5. Gently slide the chassis onto the saddle, ensuring that it remains supported during the transfer. Refer to
Figure 5 on page 9.