Operation Manual

67 Understanding the printer menus
Use To
Set the host name.
Note: The host name is limited to 15 characters, and accepts US‑ASCII,
alphanumeric characters and hyphen only.
Set Hostname
*
View the current IPv6 addresses.
View Address
*
View the current router address.
View Router Address
*
Enable DHCPv6 Enable DHCPv6 in the printer.
On
Note: On is the factory default setting.
Off
*
These settings can be changed only from the Embedded Web Server.
Wireless menu
Note: This menu is available only in printers connected to a wireless network or printer models that have a wireless
network adapter.
To access the menu, navigate to any of the following:
• Network/Ports > Network [x] > Network [x] Setup > Wireless
Use To
Network Mode Specify the network mode.
Infrastructure
Notes:
Ad hoc
• Ad hoc is the factory default setting. This configures wireless
connection directly between the printer and a computer.
• Infrastructure lets the printer access a network using an access
point.
Compatibility Specify the wireless standard for the wireless network.
802.11b/g
Note: The 802.11b/g/n is the factory default setting.
802.11b/g/n
Choose Network Select an available network for the printer to use.
View Signal Quality View the quality of the wireless connection.
View Security Mode View the encryption method for the wireless network.
AppleTalk menu
Note: This menu is available only in printer models connected to a wired network or when an optional network card
is installed.
To access the menu, navigate to any of the following:
• Network/Ports > Standard Network > Standard Network Setup > AppleTalk
• Network/Ports > Network Setup [x] > AppleTalk