Operation Manual

68 Understanding the printer menus
Use To
Activate Enable or disable AppleTalk support.
Yes
Note: Yes is the factory default setting.
No
View Name Show the assigned AppleTalk name.
Note: The name can be changed only from the Embedded Web Server.
View Address Show the assigned AppleTalk address.
Note: The address can be changed only from the Embedded Web Server.
Set Zone Provide a list of AppleTalk zones available on the network.
[list of zones available on the network]
Note: The factory default setting is the default zone for the network. If no
default zone exists, then the zone marked with an asterisk (*) is the default
setting.
Standard USB menu
Use To
PCL SmartSwitch Set the printer to automatically switch to PCL emulation when a print job received
On
through a USB port requires it, regardless of the default printer language.
Off
Notes:
• On is the factory default setting.
• When set to Off, the printer does not examine incoming data. The printer uses
PostScript emulation if the PS SmartSwitch is set to On. It uses the default
printer language specified in the Setup menu if the PS SmartSwitch is set to
Off.
PS SmartSwitch Set the printer to automatically switch to PS emulation when a print job received
On
through a USB port requires it, regardless of the default printer language.
Off
Notes:
• On is the factory default setting.
• When set to Off, the printer does not examine incoming data. The printer uses
PCL emulation if the PCL SmartSwitch is set to On. It uses the default printer
language specified in the Setup menu if the PCL SmartSwitch is set to Off.
NPA Mode Set the printer to perform the special processing required for bidirectional
On
communication following the conventions defined by the NPA protocol.
Off
Notes:
Auto
• Auto is the factory default setting. Auto sets the printer to examine data,
determine the format, and then process it appropriately.
• The printer automatically restarts when changing the setting from the printer
control panel. The menu selection is then updated.